Noises

Chat about your 2018+ AW/BZ/AE model Polos here!
Post Reply
Lolo1951
New
Posts: 1
Joined: Tue Jul 15, 2025 7:49 pm
Drives: 2019 1.0 TSI
Location: Telford

Noises

Post by Lolo1951 »

Good Evening All!

I am new to this forum and I have a couple of questions with regards to my 2019 1.0 TSI Polo.

1. About a week a go I’ve noticed a clunk sound coming from rear driver side which is mainly noticeable when making sharp turns. I have checked the boot and nothing is flying about in there + spare wheel is securely fastened down. I have got a mechanic to look at the suspension and he does not see anything wrong with it. Everything is nice and tight and does not look damaged or coroded. When I rock the car the noise is not noticeable it’s only like I said before during sharp turns.

2. I have had a warranty job done on the gearbox + clutch as there was a grinding noise when putting the car into reverse. They have changed the synchromesh + I had a brand new clutch kit in but the noise is still present when I put the car into reverse quickly. They claim it is normal as the reverse gear does not have a synchroniser. I want to clarify with more mechanically/car orientated people on this group whether I’m being fed a bunch of lies here or is that really the case?

Thanks in advance!
johnparker
Getting There!
Posts: 56
Joined: Thu Feb 08, 2007 3:35 pm

Re: Noises

Post by johnparker »

That is correct. There is no syncromesh for the reverse gear.
Post Reply