control modules

[flange101]

Hello Everybody,
i am a new member i have a 6r polo 2015 1.4tdi bluemotion and having problems with the wipers stuck in intermitted i have scanned it with vcds and no fault codes so i bought a new stalk and fitted it but still the same problem so i have decided to buy a new BCM but i am not sure should there be more control modules when i scan on vcds this is the ones i have when i scan..Chassis Type: 6R-VW26 (6C0)
Scan: 01 03 08 09 15 17 19 44 5F

VIN: WVWZZZ6RZFU102990 Mileage: 186839km-116096miles

01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
08-Auto HVAC -- Status: Malfunction 0010
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
5F-Information Electr. -- Status: OK 0000

Any help would be much appreciated thanks flange101

[RUM4MO]

This is what my wife's 2015 Polo 1.2TSI SEL has, but remember it has LED headlights and maybe a "higher" version of Infotainment system

01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
08-Auto HVAC -- Status: Malfunction 0010
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
55-Headlight Range -- Status: OK 0000
5F-Information Electr. -- Status: OK 0000

Edit:- well maybe wrong wrt the Infotainment system, but this car has front and rear parking sensors.

Another Edit:- what you will probably find is that some controllers will have other functions or subsystems included within them, so search, off hand I don't know where the functions of the old BCM now are, though I'd guess "09".

[flange101]

Thanks for that. my polo has no parking sensors just a bit basic but that suits me,just wanted to know if any modules were missing, i think i will need to code in the keys once i fit the new bcm..

[amer6R]

you can go into gateway installation list. All ticked options need to show up in autoscan