Rear door module decode help please :)

[iparkes]

Good evening all

Would anyone know if its possible to delete the rear door modules in a later 2018 Audi Rs3 8v.2 ?

I've removed the modules in the gateway 19 from the installation list, in the front door modules if I tried to long code them out ( no option to code it as a 3 door instead of a 5 ) also I removed the lin line hoping this would drop the communication to the rear modules, but it can still see them.

Any tips / advice please

Many thanks
Ian

[iparkes]

I'm pretty sure CICLO has had dealings with this beforehand but due to my account being restricted i'm unable to contact them directly.

Thanks in advance for any information

Ian

[ciclo]

Once the rear door modules are disconnected, it might be possible with ODIS E via the automatic coding of the Gateway BUS Master, but I’ve never done that.

What is the/your reason to do it? hmm.. maybe I'd rather not know.

[iparkes]

Lol

Thanks for getting back to me, really appreciate it.

I've built a 3 door Audi Rs3 hence the want to decode the doors. When you mention odis e, is that the engineering edition? As I only have what the dealers would have.

I can't find anything within mine or vcds to configure the car to be a 3 door.

Thanks
Ian

[ciclo]

Hi Ian. Yes, ODIS Engineering. Please, take a look at the following link for a "visual" explanation regarding ODIS E.

viewtopic.php?p=592578#p592578 (focus on the images and less on the links posted there).

I’m not sure if this might work for you and your great project, it worked for me, but some good friends from our forum reported that it didn't work for them, so the outcome remains uncertain.
At least you have a path to explore around here.

I wish you the best of luck with your entire project!