* Help * cam belt guide?

Rattyuk · Post by **Rattyuk** » Sun Feb 06, 2005 3:05 pm

hiya, hope this is in the right forum. I have a 93 polo genesis with a 1.3 AAV engine in it. basically what appears to be a cam belt tensioner is loose. i have had a look and cannot seem to find a way to remove it or change it and GSF dont stock a tensioner for this year and model. it has been suggested its connected to the water pump too?

Any help would be greatly received as its a daily driver.

Thanks in advance

Ratty

D4V1D · Post by **D4V1D** » Sun Feb 06, 2005 3:52 pm

GSF are right. the tensioner is on the water pump.
i can only guess theres a screw so that you can adjust it...not looked my self.
im sure someone else will fill you in properly

hardhitter · Post by **hardhitter** » Sun Feb 06, 2005 4:04 pm

The water pump itself tensions the belt. Three bolts fix the water pump they loosen to allow it to move.