the polo is staying

bell · Post by **bell** » Mon Feb 21, 2005 5:38 pm

thats right folks it is satyin figurded it was cheaper than trying to rush things on my other project. so this weekend hopefully all in car entertainment shall be in and filler work to the doors etc etc then a quick touch of paint followed by a topcoat and some new wheels of scirrocco and it should be jobs a goodun

i'll keep ya posted

bell · Post by **bell** » Thu Feb 24, 2005 11:32 am

right well the little beast is completely sound proofed loads and loads of the stuff the dorrs now sound like an expensive merc and gone is the tin like rattle lol. should be gettin the wheel sorted this weekend aswell as a nice sound system. now all i need is a suspension leg

scrapyard challenge time and a good exhaust any ideas i need a full exhaust system really but dont want to be forkin out more than 200 notes

polokris · Post by **polokris** » Thu Feb 24, 2005 12:06 pm

rite, got a question.... what did you use for the deadining? and also,

the best place to get a full system is Off "ashley" they make a good syestm, and do it from the Manifold too, best bet is to give "streetstyle automotve" he'll do it cheeaper than any where else!

give him an E-mail, or drop him a line,

[email protected]

call 07812167651

bell · Post by **bell** » Thu Mar 03, 2005 6:37 pm

cheers mate havent been on in a while so didnt see the reply

i used flashband available from b+q and focus d.i.a etc quite cheap and in my personnal opinion easier to work with and stickier than dynamat. i also expandin foamed the back 3/4s but it went insid ethe seat belts etc and buggered um up lol

did all of the car internal panelwork and the cards themselves it now sounds like a merc when you shut the door lol its great