Another new (Scottish) member......
Another new (Scottish) member......
Alright Guys. After months of reading your posts with interest, I've finally got round to signing up. Bought a Red Polo Gti last November and have to say I'm loving it. Only mods so far are mudflaps, 6 disc in dash changer (big improvement on boot mounted job) and 6x9's. One of the best things about them is the fact there are very few on the road, I've only seen about 2/3 in Glasgow since i got it.
Only other Polos.Net member (Starbank) i've come across owns a Black Lupo Gti and spent about 1.5 hours racing me through the scottish borders last month (see 'Was That You?').........unfortunately he won!
Have also experienced many of the problems talked about in the forum i.e crunching gears, knocks from gearbox and rocking fourth gear, but overall ownership has been fairly hassle free........(touch wood).
Hopefully looking to get a BMC CDA fitted soon, and also a strut brace to tighten up the front end. Anybody know the best make/cheapest?
Only other Polos.Net member (Starbank) i've come across owns a Black Lupo Gti and spent about 1.5 hours racing me through the scottish borders last month (see 'Was That You?').........unfortunately he won!
Have also experienced many of the problems talked about in the forum i.e crunching gears, knocks from gearbox and rocking fourth gear, but overall ownership has been fairly hassle free........(touch wood).
Hopefully looking to get a BMC CDA fitted soon, and also a strut brace to tighten up the front end. Anybody know the best make/cheapest?
-
carmadaaron
- Bling Bling Diamond Member
- Posts: 4350
- Joined: Fri Mar 12, 2004 8:55 pm
- Location: Scotland
-
carmadaaron
- Bling Bling Diamond Member
- Posts: 4350
- Joined: Fri Mar 12, 2004 8:55 pm
- Location: Scotland
-
carmadaaron
- Bling Bling Diamond Member
- Posts: 4350
- Joined: Fri Mar 12, 2004 8:55 pm
- Location: Scotland
www.imageshack.us
go there, upload the pic
copy and paste the URL it gives you...
and use the
hope this helps
go there, upload the pic
copy and paste the URL it gives you...
and use the
-
Randall
- Gold Member
- Posts: 909
- Joined: Sun Sep 26, 2004 8:47 pm
- Location: Aylesbury, Buckinghamshire
Hey dude,
Nice motor you got there...
not sure if you had much luck with the strut brace at all but have been looking into these me self as eventually im going to have sum coilovers
have a gander at www.strutbracer.co.uk
cheers
rich
Nice motor you got there...
not sure if you had much luck with the strut brace at all but have been looking into these me self as eventually im going to have sum coilovers
have a gander at www.strutbracer.co.uk
cheers
rich
-
carmadaaron
- Bling Bling Diamond Member
- Posts: 4350
- Joined: Fri Mar 12, 2004 8:55 pm
- Location: Scotland
-
carmadaaron
- Bling Bling Diamond Member
- Posts: 4350
- Joined: Fri Mar 12, 2004 8:55 pm
- Location: Scotland