k & n induction

Chat about your MKIV (6N) Polo
polo_mf
Bronze Member
Posts: 189
Joined: Sat Apr 09, 2005 1:15 am
Location: london

k & n induction

Post by polo_mf »

elo all

got a 1.0L 6N and wanna make it look/sound/drive better for smalll money.

the k & n in duction kit for it is less than £100. do they make much difference???? wat they look like when theyre on????
any help on this or any other tips for cheap and easy but effective mods grateful!!!

cheers guys & gals
BalinJu
Getting There!
Posts: 99
Joined: Mon Sep 22, 2003 8:11 pm
Location: Zurrieq - Malta

Post by BalinJu »

I've got one and what I can say is this:

Do not expect your power to increase, ok maybe you will get some better high end power (at high revs), but not by a lot. What I noticed with the k&n 57i mostly is the responce. Its improved quite a lot, touch the accelarator pedal, and you get the power on much more immediate than with the normal filter
carmadaaron
Bling Bling Diamond Member
Posts: 4350
Joined: Fri Mar 12, 2004 8:55 pm
Location: Scotland

Post by carmadaaron »

BalinJu wrote:I've got one and what I can say is this:

Do not expect your power to increase, ok maybe you will get some better high end power (at high revs), but not by a lot. What I noticed with the k&n 57i mostly is the responce. Its improved quite a lot, touch the accelarator pedal, and you get the power on much more immediate than with the normal filter
how does it sound, and what has the MPG been? increased?
dubmk4
Getting There!
Posts: 70
Joined: Tue Oct 12, 2004 8:03 pm
Location: south wales Drives Corrado 1.8 16v, MK4 Polo

Post by dubmk4 »

my mpg hasnt gone up.
car sounds more throttley (if thats a word) when accelerating kinda like a fake turbo.good if your running along in 3rd at 30ish then boot it.

other than that slightly better throttle response and nice little toy in your engine bay.im also running 2 cold air feeds on mine.
my mate reckoned it sounded quite good too.
polo_mf
Bronze Member
Posts: 189
Joined: Sat Apr 09, 2005 1:15 am
Location: london

Post by polo_mf »

wat does it look like in your engine bay????
how much u pay for it and where bouts u get it from??
cheers :D
dubmk4
Getting There!
Posts: 70
Joined: Tue Oct 12, 2004 8:03 pm
Location: south wales Drives Corrado 1.8 16v, MK4 Polo

Post by dubmk4 »

cant remember where i got mine from just go on google and dont pay more than £60 . sits where the standard crappy airbox normally is then there is one air feed down the left side as you look in that goes down to the lower grill in the bumper and another on the right hand side as you look in going to a small space behind the front which i found . looks abit odd at mo as one pipe is standard black k&n thing and the other was sum shiny aluminuim/foil type thing.
BalinJu
Getting There!
Posts: 99
Joined: Mon Sep 22, 2003 8:11 pm
Location: Zurrieq - Malta

Post by BalinJu »

This is how mine looks like.

Image

Regards noise, I cannot really tell because when I fitted the induction kit, I already had a back box, and probably the noise got damped by the noise of the back box :D

Regards mpg, I think it improved but by a very small margin, say about with 13L of fuel, instead of 180km I do 184km or even less.

When you accelarate hard, it sounds like a pppppffffffftttttt. Not a dumpvalve like sound, but more like air is being sucked in brutally (for a very short time)
polo_mf
Bronze Member
Posts: 189
Joined: Sat Apr 09, 2005 1:15 am
Location: london

Post by polo_mf »

cheers for the pic :D

think i mite get one!! just need to get used to the look of it.. looks like a gaping space where the air filter box was!!

:)
dubmk4
Getting There!
Posts: 70
Joined: Tue Oct 12, 2004 8:03 pm
Location: south wales Drives Corrado 1.8 16v, MK4 Polo

Post by dubmk4 »

balinju,
see you have taken out the warm air hose.but left the black crappy thing that sits near the wing.
on my car i left the warm air hose on connected to this and ran the clip thing that was under the old airbox to it still.

What did you do with the clip thing on your car just disconnect it alll then seal up any holes?
kona87
New
Posts: 6
Joined: Wed Apr 20, 2005 1:55 pm
Location: Stoke on trent

Post by kona87 »

hi there just wondered if you have got an induction kit yet? am lookin at getting one for my m4 1.4 8v just unsure of what to get?!
spankone
Getting There!
Posts: 77
Joined: Thu Apr 14, 2005 1:53 pm
Location: just south of peterborough

Post by spankone »

i wouldnt bother i would just mod the air box and run a new air or get a bmc style intake
James0121
Bronze Member
Posts: 224
Joined: Wed May 05, 2004 9:13 pm
Location: Whitstable, Kent

Post by James0121 »

hey up

Here is a link to the bmc page

http://www.bmcairfilter.com/VisModel.asp

this link should show one fitted on a 1L polo

http://www.bmcairfilters.com/cgi-bin/Im ... lo_1.1.JPG

The one for the 1.4 8v is about £126

James
spankone
Getting There!
Posts: 77
Joined: Thu Apr 14, 2005 1:53 pm
Location: just south of peterborough

Post by spankone »

i think k&n are way over rated tbh bmc may be more but loads better....
James0121
Bronze Member
Posts: 224
Joined: Wed May 05, 2004 9:13 pm
Location: Whitstable, Kent

Post by James0121 »

they look as if they have a slightly better design im liking it, now where am i going to find the £126 hmmm gunna have to think bout it
BalinJu
Getting There!
Posts: 99
Joined: Mon Sep 22, 2003 8:11 pm
Location: Zurrieq - Malta

Post by BalinJu »

dubmk4 wrote:balinju,
see you have taken out the warm air hose.but left the black crappy thing that sits near the wing.
on my car i left the warm air hose on connected to this and ran the clip thing that was under the old airbox to it still.

What did you do with the clip thing on your car just disconnect it alll then seal up any holes?
the black crappy thing on the left near the wing is still there because it was not disconneted completly yet 8) I removed the warm air hose completly because cold air is better for the car then warm air, and in my country, we never get temperatures below 5degrees so it is hardly for any use :)

The clip thing that you are refering to is the oil brether?
Post Reply