Milltek sport exhaust system

Chat about your MKV (6N2) Polo GTi
Post Reply
Si_GTi
Moderator
Posts: 5020
Joined: Thu Apr 08, 2004 1:14 pm
Location: Shropshire

Milltek sport exhaust system

Post by Si_GTi »

Fellow GTi owners!

I've been in contact with Milltek regarding a performance exhaust system for the Polo GTi, and have been informed that they currently have no plans to develop a system due to lack of interest from GTi owners. Transcript of the reply e-mail follows:
Hi Simon,

Many thanks for your interest in Milltek Sport products. Unfortunately, we don't offer any products for your vehicle as we haven't received enough interest in the past. If we release anything in the near future, I'll let you know.

Kind regards,

Pete Withers
Sales Team
Milltek Sport - Performance that blows your mind, not your ears!

Tel. +44 (0)1884 841525
Fax. +44 (0)115 944 0366
No surprise there, as we already knew that Milltek don't yet cater for the Polo...

I was wondering what the interest level would be like for a Milltek development for the Polo GTi, and how many owners would be interested in having a Milltek system fitted if they could be persuaded to develop a new application for us! :D

Perhaps I could get a list of users who would be interested in a Milltek system and present it to Milltek and see if it changes their mind...? :twisted:

More information about Milltek at www.millteksport.com

Cheers
Johnmk4
Bronze Member
Posts: 166
Joined: Mon Jan 26, 2004 3:16 pm
Location: Woking, Surrey
Contact:

Post by Johnmk4 »

there are plenty of similar systems though like Supersprint
dubpolo
Sponsor
Posts: 1494
Joined: Sun Dec 07, 2003 12:08 am
Location: ellesmere port

Post by dubpolo »

I would much prefer a miltek system than a superspint one. Better made, not as noisy and I’ve heard only good things about them!

This could work well with the chip!

Me please
ICEYPOLO
Silver Member
Posts: 471
Joined: Fri Apr 02, 2004 9:01 pm
Location: Nottingham
Contact:

Post by ICEYPOLO »

hi guys,

my mate personaly knows the manager/ owner of miltek in Ilkeston (5 mins from my house) and has enquired about this before for me...

unless you can get bout 10+ people to go for one then they wouldnt even consider it... even offered mine as a demo but they werent bothered...

good luck if you intend to keep trying them! :wink:

scott
Si_GTi
Moderator
Posts: 5020
Joined: Thu Apr 08, 2004 1:14 pm
Location: Shropshire

Post by Si_GTi »

ICEYPOLO wrote:hi guys,

my mate personaly knows the manager/ owner of miltek in Ilkeston (5 mins from my house) and has enquired about this before for me...

unless you can get bout 10+ people to go for one then they wouldnt even consider it... even offered mine as a demo but they werent bothered...

good luck if you intend to keep trying them! :wink:

scott
Thanks Scott, challenge extended :lol:

10 or more - can it be done? Out of interest I'm gonna start a list and see how many of us are up for it 8)

Copy list, add name, you know the drill :wink: and if we have enough interest I will approach Milltek again with a list of names! BUT you have to want this, if I were to take a list to Milltek and tell them I have a dozen owners wanting a system and ask them if they are interested in a project car to work on, it'd be nice to have a dozen guaranteed buyers!

Cheers 8)

1. Si_GTi
dubpolo
Sponsor
Posts: 1494
Joined: Sun Dec 07, 2003 12:08 am
Location: ellesmere port

Post by dubpolo »

1. Si_GTi
2. dubpolo
live2themaxuk
Bronze Member
Posts: 121
Joined: Mon Sep 29, 2003 11:32 pm

Post by live2themaxuk »

Just a vote for a supersprint system. It sounds wicked. Its not loud at all, its just got a 'sporty note'. Very subtle yet a marked and NEEDED improvement over stock. Only issue as such is its mild steel not stainless but no rust 4 me yet 2 years on.

J
DMWRIGHT
Bronze Member
Posts: 148
Joined: Mon Feb 23, 2004 4:38 pm
Location: Portsmouth
Contact:

Post by DMWRIGHT »

AMD have my name down on the development list for a cat back Polo GTI system, however they have to keep asking Miltek and the feedback goes along the lines of, new cars have priority and the numbers just don't make it worth while. If there is a lull then they have no problem in extending the product range, but currently the development waiting time on new cars is about 9 months will certain VAG cars having priority
User avatar
neilw
Gold Member
Posts: 823
Joined: Tue Apr 06, 2004 8:15 am
Location: Southampton

Post by neilw »

Guess this is the downside of owning a rare'ish car.

I'm planning abit of a franinstine (sp) Exaust, made up of a Supersprint center pipe, then a custom built backbox hidden behind the back bumper. Not keen on tail pipes sticking out the back.

I've herd good things about Milltek, hope you guys manage to sort something with them!
simcity47
New
Posts: 7
Joined: Wed Apr 27, 2005 9:21 pm
Location: Sutton Coldfield

Post by simcity47 »

i had a milltek on my old Cupra Ibiza, and the quality of fit, plus the sound was exceptional.

It wasent obtrusive, yet it had a pleasant roar at over 4k.

As stated the Supersprint is a good alternative, but if you need 10 people to sign up for it, you can count me in.
mikegti
Silver Member
Posts: 417
Joined: Tue Jan 20, 2004 9:57 pm
Location: Brum
Contact:

Post by mikegti »

how would you all rate milltek in comparison to powerflow? I almost bought a cat back stainless system from them for about £240, keeping the two boxes to keep noise down - I dont want to be deafened as I spend a fair amount of time on the motorway!
Si_GTi
Moderator
Posts: 5020
Joined: Thu Apr 08, 2004 1:14 pm
Location: Shropshire

Post by Si_GTi »

Well personally I've heard good things about both - my sister's bloke had a Powerflow cat-back on his 6n 16v and it was really nice. Not overly loud, it was a subtle and sporty tone which sounded really good when he was pushing along at speed :)

On the other hand, most of the reports about Milltek have come from the Golf boys, largely R32 owners, who don't seem to have a bad word about them!

If Milltek aren't too keen on developing a system (bearing in mind that Ritey's name has been on the AMD development list for some time now) then Powerflow is certainly a viable alternative - £240 for a cat-back stainless system is pretty good too!
GTI NUT
Getting There!
Posts: 91
Joined: Wed Mar 23, 2005 12:01 am
Location: Scotland

Post by GTI NUT »

Any idea how much this milltek system would cost, we have been looking for exhaust and were quoted other such as Powerflow etc.
Si_GTi
Moderator
Posts: 5020
Joined: Thu Apr 08, 2004 1:14 pm
Location: Shropshire

Post by Si_GTi »

I think its gonna be a no-go on this one I'm afraid :(

Powerflow or Supersprint is probably your best bet! I think I'll get a Powerflow, when I can afford it and when my insurance allows :wink:
GTI NUT
Getting There!
Posts: 91
Joined: Wed Mar 23, 2005 12:01 am
Location: Scotland

Post by GTI NUT »

There was a powerflow exhaust on ebay few weeks back only thing that put me off was that the guarantee did not transferownership. Would have been a good bargain. :roll:
Post Reply