Lowering

Chat about your 9n Polo (inc GT and Fun)
Post Reply
shotta
New
Posts: 3
Joined: Tue Apr 26, 2005 2:46 pm

Lowering

Post by shotta »

What would you guys suggest to sit my mk6 polo on the floor im a bit of a noob not to modding but to owning a polo I have a mk1 golf GTI and a mk1 cabrio project and I use this polo as my run around and im sick of it looking like a 4x4 I dont wanna spend heaps lowering it but want it sat on the floor on the standard alloys with spacers to sit em out a bit more,

any help appreciated heres my polo- http://www.clubgti.com/forum/forum_post ... 68150&PN=1

needs a clean lol its not modded much all that ive done so far is remove the polo badge of the tailgate and the 1.4 badge is gone too, on the inside of the car ive got an alpine mp3/dab headunit a gamecube alpine tv and a 12" jl audio sub :wink:
carmadaaron
Bling Bling Diamond Member
Posts: 4350
Joined: Fri Mar 12, 2004 8:55 pm
Location: Scotland

Post by carmadaaron »

welcome!


spend £120 on some lowering springs, (-50mm) from eibach, and get some decent 16/17s 8)
liam_gt
Getting There!
Posts: 80
Joined: Mon Mar 21, 2005 3:08 pm
Location: larkhall ,scotland

LOWERING

Post by liam_gt »

ive bought -50mm spax springs cost me £80 no that dear
carmadaaron
Bling Bling Diamond Member
Posts: 4350
Joined: Fri Mar 12, 2004 8:55 pm
Location: Scotland

Re: LOWERING

Post by carmadaaron »

liam_gt wrote:ive bought -50mm spax springs cost me £80 no that dear
hows the handling/ride quality, got any pix? 8)
liam_gt
Getting There!
Posts: 80
Joined: Mon Mar 21, 2005 3:08 pm
Location: larkhall ,scotland

lowering

Post by liam_gt »

ill get pics up as soon as i get ma camera fixed
carmadaaron
Bling Bling Diamond Member
Posts: 4350
Joined: Fri Mar 12, 2004 8:55 pm
Location: Scotland

Re: lowering

Post by carmadaaron »

liam_gt wrote:ill get pics up as soon as i get ma camera fixed
hows the handling, ride with those standard shocks and upgraded springs?
vwclub.gr
Bronze Member
Posts: 179
Joined: Sun Jan 02, 2005 3:33 pm
Location: Athens-Greece
Contact:

Post by vwclub.gr »

Standard shocks with lowering springs should be considered as a crime! The socks will be off in a couple of months and during this time they won't be working as they should. You should better change shocks as well
carmadaaron
Bling Bling Diamond Member
Posts: 4350
Joined: Fri Mar 12, 2004 8:55 pm
Location: Scotland

Post by carmadaaron »

vwclub.gr wrote: The socks will be off in a couple of months.
yes shocks cost money too, (socks? :lol: jk)

and springs for around £100
springs and shocks more likely to be double that, :cry:
toXXin
Moderator
Posts: 1029
Joined: Thu Nov 21, 2002 5:42 pm
Location: Northampton

Post by toXXin »

I'd rather double my money than kill myself because my shocks are fooked.

Sorry, but vwclub.gr is right. OE shocks will die very quickly when used with aftermarket lowering springs.

To get the right height, coilovers are your only hope. I tried 30mm Eibach Springs, Nelson_Wilbury tried 50mm Eibach springs, and neither of us were happy with the height. I bought some KW coilovers, and Neil became very jealous! ;)
carmadaaron
Bling Bling Diamond Member
Posts: 4350
Joined: Fri Mar 12, 2004 8:55 pm
Location: Scotland

Post by carmadaaron »

toXXin wrote:I'd rather double my money than kill myself because my shocks are fooked.

Sorry, but vwclub.gr is right. OE shocks will die very quickly when used with aftermarket lowering springs.

To get the right height, coilovers are your only hope. I tried 30mm Eibach Springs, Nelson_Wilbury tried 50mm Eibach springs, and neither of us were happy with the height. I bought some KW coilovers, and Neil became very jealous! ;)
well height is down to taste really isnt it?, and if speed ramps are near then coilies are too much?

wearing out quickly, how long do u rekon? 1 yr? 2yrs? etc :?:
toXXin
Moderator
Posts: 1029
Joined: Thu Nov 21, 2002 5:42 pm
Location: Northampton

Post by toXXin »

I had my coilovers on a VERY low height and I never caught a speedhump.

Quickly is the answer to your next question. Your shock will end up exploding/pissing out oil when it's had enough of not being able to damp and rebound.
Post Reply