Hi All,
I ordered some coilovers a few weeks back, nothing has come through as yet but had a few questions to help me prep for the occassion...
1 do they arrive all maded up or would i need to make them up?
2 if i have to make them up...any tools on the recommended list?
3 would you recommend applying any form of grease to the threads for future precaution
4 anything recommendations for when i go about fitting these?
Rich
Coilovers *ADVICE NEEDED*
they will not be made up! the springs come seperate to the shock. you also need to buy front top mounts from VW and a big tube of copper slip or grease for the threads. stuff in the can is good!
you will need spring compressors, and i think a 20mm deep offset spanner (don't quote me on the size)
a good set of axal stands and trolly jack.
remember to put copper slip on your hubs before putting your wheel back on.
you will need spring compressors, and i think a 20mm deep offset spanner (don't quote me on the size)
a good set of axal stands and trolly jack.
remember to put copper slip on your hubs before putting your wheel back on.
-
Randall
- Gold Member
- Posts: 909
- Joined: Sun Sep 26, 2004 8:47 pm
- Location: Aylesbury, Buckinghamshire
Hey Dude,dubpolo wrote:they will not be made up! the springs come seperate to the shock. you also need to buy front top mounts from VW and a big tube of copper slip or grease for the threads. stuff in the can is good!
you will need spring compressors, and i think a 20mm deep offset spanner (don't quote me on the size)
a good set of axal stands and trolly jack.
remember to put copper slip on your hubs before putting your wheel back on.
Thanks for the response is it just the top mount i need or is it the bearing too!?
Rich