Page 2 of 2
Re: Wiring Diagram for 6n2 Comfort Flashers
Posted: Fri Jun 17, 2011 1:03 pm
by Trunkz
Verity wrote:Mart!n-GTI-DK has comfort flashers. by the sounds of it he did it a while ago. but might be worth PMing him, as he might remember exactly which wire goes where for the polo
Good shout, I've given him a PM and i'll let you guys know of the outcome. Off-topic, I f*****g hate those black plastic rings that hold the HID bulbs

Re: Wiring Diagram for 6n2 Comfort Flashers
Posted: Fri Jun 17, 2011 1:49 pm
by Trunkz
Figured it out. Here's the correct wiring procedure for the 6n2 Polo:
Relay Loom ---->
Hazard Loom
Brown ----> Brown
Black/White ----> Black/Grey
Green/White ----> Green/White
Green ----> Black/Green
White ----> Black/White
The issue was in the previous wiring diagram for the lupo, it suggested green/white to black/yellow, which we dont have. Hope this helps

Re: Wiring Diagram for 6n2 Comfort Flashers
Posted: Fri Jun 17, 2011 2:53 pm
by neilGTI
Nice one Trunkz
Good to hear you got it all working, where did you put the extra relay ? I was thinking of losing it in the dash behind the stereo somewhere when i do mine.
Wiring Diagram for 6n2 Comfort Flashers
Posted: Fri Jun 17, 2011 6:00 pm
by nigelelliott394
Nice
@Neil how much was the kit?
Re: Wiring Diagram for 6n2 Comfort Flashers
Posted: Fri Jun 17, 2011 6:33 pm
by neilGTI
I got the kit for £26 off ebay
Wiring Diagram for 6n2 Comfort Flashers
Posted: Fri Jun 17, 2011 6:47 pm
by nigelelliott394
Nice, I'll have a look now myself.
Re: Wiring Diagram for 6n2 Comfort Flashers
Posted: Sat Jun 18, 2011 8:58 am
by neilGTI
The majority of the ones on ebay are about £45 for the kit, i was lucky to find an auction rather than a buy it now
Re: Wiring Diagram for 6n2 Comfort Flashers
Posted: Sat Jun 18, 2011 11:18 am
by Trunkz
neilGTI wrote:Nice one Trunkz
Good to hear you got it all working, where did you put the extra relay ? I was thinking of losing it in the dash behind the stereo somewhere when i do mine.
There's plenty of space in the dash. I just chucked it just below the clocks

A word of advise, make sure your connections are properly tight, and
definitely do them as far as away from the hazard switch as possible.
Re: Wiring Diagram for 6n2 Comfort Flashers
Posted: Tue Jun 21, 2011 9:32 am
by neilGTI
Have got the kit come through the post now, just need to get some connectors or take the soldering iron home from work and then get it fitted

Re: Wiring Diagram for 6n2 Comfort Flashers
Posted: Wed Jun 22, 2011 7:40 am
by neilGTI
Now fitted, thanks to Trunkz for posting up the correct wiring details, got it done within half an hour

Re: Wiring Diagram for 6n2 Comfort Flashers
Posted: Wed Jun 22, 2011 10:14 am
by joe2612
want.this.mod