UK-POLOS.NET - THE VW Polo Forum

nice car by the way. we talked a lot, but never saw it in whole. very good looking polo

iichel wrote:nice car by the way. we talked a lot, but never saw it in whole. very good looking polo

Thanks... [emoji4]


Sent from my iPhone using Tapatalk

iichel wrote: Tue Aug 29, 2017 8:04 am nice car by the way. we talked a lot, but never saw it in whole. very good looking polo

...totally agree

Also to highlight the MFSW with DSG paddles.

Subsystem 3 - Part No SW: 5TA 959 442 HW: 5TA 959 442
Component: E221__MFL-TAT H06 0023
Serial number: 2991519341401746AJ2B
Coding: 250000

ciclo wrote:

iichel wrote: Tue Aug 29, 2017 8:04 am nice car by the way. we talked a lot, but never saw it in whole. very good looking polo

...totally agree

Also to highlight the MFSW with DSG paddles.

Subsystem 3 - Part No SW: 5TA 959 442 HW: 5TA 959 442
Component: E221__MFL-TAT H06 0023
Serial number: 2991519341401746AJ2B
Coding: 250000

Thanks ciclo...
Steering is from vw touran..


Sent from my iPhone using Tapatalk

ciclo wrote: Mon Aug 28, 2017 5:45 pm

smg_shardul wrote: Mon Aug 28, 2017 5:37 pm
I think my existing BCM will support to all my requirement

No. It's explained in my wiring sale and you should know it.
You must buy/have/install a BCM Max.

This is the best advice I'll give you, contact firegrafik.
Now think because it is the best advice.

It is possible to get new BCM max 7E0937090B. My supplier has several units in stock. Welcome to PM for everyone who is of interest.

firegrafik wrote:

ciclo wrote: Mon Aug 28, 2017 5:45 pm

smg_shardul wrote: Mon Aug 28, 2017 5:37 pm
I think my existing BCM will support to all my requirement

No. It's explained in my wiring sale and you should know it.
You must buy/have/install a BCM Max.

This is the best advice I'll give you, contact firegrafik.
Now think because it is the best advice.

It is possible to get new BCM max 7E0937090B. My supplier has several units in stock. Welcome to PM for everyone who is of interest.

Yes sure I am interested to install BCM max
I have sent pm check it out...


Sent from my iPhone using Tapatalk

7Е0097090С will this bcm support my car ?


Sent from my iPhone using Tapatalk

Yes, it does. It is the freshiest Max BCM type PQ25 for now.
Ciclo already has it in his Polo

firegrafik wrote:Yes, it does. It is the freshiest Max BCM type PQ25 for now.
Ciclo already has it in his Polo

Ok thanks I will order that..


Sent from my iPhone using Tapatalk

If I want to install HBA which parts are required?


Sent from my iPhone using Tapatalk

Please read this topic with attention, it explains the parts that are necessary.

viewtopic.php?f=56&t=69603&start=15#p519243

viewtopic.php?f=56&t=69603

Where I will be able to source mirror with camera and stalks?
And stalks are plug n play or need extra wiring?


Sent from my iPhone using Tapatalk

you need to re-wire some of the stalks, you also need to install auto light switch.
for the mirror, do you want a new one or a used one? new one is probably bought at VW dealer, used one maybe on ebay?

if you need new parts, I can order in Germany and send them to you. you can write me a PM if you need some help.

iichel wrote:you need to re-wire some of the stalks, you also need to install auto light switch.
for the mirror, do you want a new one or a used one? new one is probably bought at VW dealer, used one maybe on ebay?

if you need new parts, I can order in Germany and send them to you. you can write me a PM if you need some help.

I am going to install auto switch also as I am installing auto dimming mirror & Rls


Sent from my iPhone using Tapatalk

I want to remind you that I will only make the wiring B (as we agreed).

Wiring B is not compatible with Light Assist, it's compatible with everything, except Light Assist.

'B' Use the mouse scroll (or your finger) and read please viewtopic.php?f=62&t=69223#p516196

Responding to your private message (not private messages, please)

I provide what is indicated, which are, wires for BCM Max adaptation and automatic lights, connectors, relays, fuses, coding, and technical support for the installation.
(I do not provide wires for installations of bixenon, dimming mirror and RLS, AFS system, or any other type of installation, such as jet rockets, rubber ducks, etc... )

The parts that you must have or buy:
BCM Max, AUTO light switch, light sensor, and Dimmer for interior lights.

------------

It is not my obligation to provide technical support for:
Installation of dimming mirror or RLS.
Installation of Bixenon headlights.
Installation of AFS system.
Or any other type of installation ...
In short, I can not provide technical support for all the new mods you want to do. This would only be possible if you were willing to pay more for my technical support than for all the parts you want to install on your 6R.

However, you have all this information in the links of the sale, and in the forum (in which I actively participate).

Therefore, this topic is created for B wiring installation, please, focus on this.

Later it will be useful for your new mods or ideas ... in which I could actively participate.