Re: Where do i get an ABS code to link new part to the car?
Posted: Mon Mar 09, 2026 9:34 am
Not a problem - can you message me privately?
Probably the Worlds greatest Polo resource
https://uk-polos.net/
Not a problem - can you message me privately?
Thanks for the message - I cant respond as I havent posted enough in the forum apparently. My email is [redacted]
Hi! I tried to flash it 2 times, but both were unsuccessful... and there is another problem. With 8X0 fw you need to change 7th and 8th symbols of VIN in the dash from 6R to 8X to enable coding. So I think that it's easier to retrofit ATE mk60ec1 ABS unit with the same VIN manipulation)) mk60ec1 much better than esp8.2 even with A1 fw))ciclo wrote: Sat Feb 28, 2026 9:37 amHey, do you remember if anyone on Drive2.ru made a 'Frankenstein' firmware or was able to load firmware from an A1 onto the following hardware?MrCollayder wrote: Thu Feb 26, 2026 8:19 am More information about ESP8.2 is here as usual.
Use google translate or similar
Address 03: ABS Brakes (J104) Labels:. User\6R0-907-37x-ESP82.lbl
Part No SW: 6R0 907 379 BE HW: 6R0 907 379 AF
Component: ESP8.2i front H05 0001
The goal is for these units to be able to read the wheel rotation direction signals with the new ABS speed sensors.
The AI says someone from Drive2.ru did it, but I can't find the thread.(FW: 8X0907379H or J)
![]()