UK-POLOS.NET - THE VW Polo Forum

I'm supprised v dub machine don't do em seeming as they fi the switched and fogs.

You will have to give them a ring mate, how far from a vw garage are you ?

I asked them before and they dont.

About 5-10 mins lol but there so hard to het ahold of the parts department.

Might be best to pop there if your going past any time.

yeah im a familiar face there anyhow, just a shame tpretards had to mess me about !, gotta be somewhere else to get them though

red6n2 wrote:yeah im a familiar face there anyhow, just a shame tpretards had to mess me about !, gotta be somewhere else to get them though

Cant see how they meesed up they got all the info they need on the computers in front of them lol, its not like you asked for something hard lol

urgh i know i was so annoyed when i got there, i even double checked with 'giovani' over the phone that i had all the bits i need all i got was 5 not even 6 but 5 of the wrong screws !

Silly fools what did they think you was going to do use 2 and a half screws each side

I will warn you mate these pics are great took them when it stoped raining for 5 mins




They are black in mine as when I had the bumper done I told the guy to kept them spray it with them in If he felt they might brake when trying to remove them. They are grey square shape with a hole in for the screw which you push into the bumper.






To tell the truth you could prob use any screw as long as they are long enough.

If you cant get either you could prob use a small nut and bolt, but thats up to you.

Thanks dude. had a ring around all the breakers and there all shut till Tuesday so il have a look maybe mid week or possibly sat

Just be very careful when trying to remove the screw holders they are only plastic and will prob brake easy.

Haven't put em in properly but there's a taster

Didn't fit em cause the drivers side needs the wire reconnecting and its raining and I can't be assed.

They will look good when you get them done

Right so I got home at 6:45 and thought b*******s I'm doing it and so it begun...

First stop maplins for some crimps which is conviently just down the road



So you all know how to crimp wires it's not hard we've all done it blah blah blah, the result...







One working foggy

Next...

I had protected the connections with electrical tape so took it off to reveal



Then I realised the lock in on the other connector had broke...

... At this point I realised I was having a mare.






Was a little unsure of what to do but I figured I'd started so il carry on cable tied a secure connection





Found some trainers,



Electric tape around the connections to ensure water doesn't interfere.





Next were the bolts I got from BNQ there 3/16 bolts zinc coated to last against rust,



BOOM !!.





As the car came with fogs I already had the grills so popped em on.





And the twins together...





And the finished product...





















You all said my car was screaming out for them and eventually I agreed so comments anyone ?.

I loved how you had them laying on the wet ground lol

Are you gonna get some bulbs to try and match in with your headlights ?