Re: Amarok Oem Bixenon retrofit
Posted: Fri Feb 09, 2018 10:33 am
If I buy the best one, there will be no difference in the modifying of the wiring ? The best one is for auto headlights.
UK-POLOS.NET - THE VW Polo Forum
Probably the Worlds greatest Polo resource
https://uk-polos.net/
Amarok Oem Bixenon retrofit
Page 3 of 16
Re: Amarok Oem Bixenon retrofit
Posted: Fri Feb 09, 2018 4:00 pm
I have checked and 7E0937089Z2G and 7E0937090CZKK are first equipment parts and will be delivered for sale after june 2018. I must find another BCM.
Re: Amarok Oem Bixenon retrofit
Posted: Fri Feb 09, 2018 4:19 pm
7E0937090C ZJD
Re: Amarok Oem Bixenon retrofit
Posted: Sat Feb 10, 2018 8:26 am
In order to continue building this thread for Bixenon retrofitting in your Amarok (June 2012 - January 2013, D 'MY') I need a recent VCDS Autoscan from your Amarok.
... to avoid installing no-needed wires in your 17-pin light switch connector and 73-pin BCM connectors.
... to avoid installing no-needed wires in your 17-pin light switch connector and 73-pin BCM connectors.
Re: Amarok Oem Bixenon retrofit
Posted: Sat Feb 10, 2018 8:14 pm
Code: Select all
Saturday,10,February,2018,19:53:13:65217
VCDS -- Windows Based VAG/VAS Emulator
VCDS Version: 12.12.0.0
Data version: 20130910
VIN: WV1ZZZ2HZDA007105 License Plate:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Chassis Type: 2H (6N0)
Scan: 01 03 08 09 10 15 17 19 22 25 32 37 56 69
VIN: WV1ZZZ2HZDA007105
01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
22-AWD -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
32-Differential Locks -- Status: OK 0000
37-Navigation -- Status: Malfunction 0010
56-Radio -- Status: OK 0000
69-Trailer -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine (J623-CNEA) Labels: 03L-906-022-CFC.clb
Part No SW: 03L 906 012 AD HW: 03L 907 309 AC
Component: R4 2,0L EDC H21 2710
Revision: 74H21--- Serial number: 00000000000000
Coding: 01594012230600080001
Shop #: WSC 07456 790 50316
ASAM Dataset: EV_ECM20BTD01103L906012AD 001002
ROD: EV_ECM20BTD01103L906012AD.rod
VCID: 66C9AED899990C2E0EF-8033
No fault code found.
Readiness: 0 0 0 0 0
-------------------------------------------------------------------------------
Address 03: ABS Brakes (-----) Labels: 2H0-907-379.clb
Part No SW: 2H0 907 379 L HW: 2H0 907 379 D
Component: ESP MK25A XT H44 0110
Revision: 00H44001
Coding: B07324B691940D9C24A389A36F5590
Shop #: WSC 07456 790 49164
VCID: 397335A4B0A753D693D-806C
No fault code found.
-------------------------------------------------------------------------------
Address 08: Auto HVAC (J301) Labels: 7E5-907-047.clb
Part No SW: 2H0 907 047 E HW: 2H0 907 047 E
Component: Climatic-T5 H20 0505
Revision: 00001008
Coding: 0000000002
Shop #: WSC 07456 790 50316
ASAM Dataset: EV_ClimaticT5 A01003
ROD: EV_ClimaT5Basis.rod
VCID: 2A511AE84D01E84EEA7-807F
No fault code found.
-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519) Labels: 6R0-937-08x-09.clb
Part No SW: 6R7 937 086 M HW: 6R7 937 086 M
Component: PQ25 BCM H28 0555
Revision: -3------ Serial number: --------------
Coding: 640000380C210000002808102C4B84D40000410E60020000300000000000
Shop #: WSC 07456 790 50316
VCID: 4D9B7174142FDF762F5-8018
Subsystem 1 - Part No SW: 6R0 959 801 M HW: 6R0 959 801 M Labels: 6R0-959-801.CLB
Component: J386__TSG_FT 002 3321
Coding: 000000
Subsystem 2 - Part No SW: 6R0 959 802 P HW: 6R0 959 802 P Labels: 6R0-959-802.CLB
Component: J387__TSG_BT 002 3321
Coding: 100000
Subsystem 3 - Part No SW: 2H0 959 442 HW: 2H0 959 442
Component: E221__MFL-DC1 H01 0103
Coding: A4FFFF
No fault code found.
-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J446) Labels: 7E0-919-475.clb
Part No SW: 7E0 919 475 L HW: 7N0 919 475
Component: PARKHILFE 8K H06 0106
Revision: -------- Serial number: 28231432400057
Coding: 110003
Shop #: WSC 12345 123 12345
ASAM Dataset: EV_VW75XParkAssis8K 001003
ROD: EV_VW75XParkAssis8K.rod
VCID: 3B7F2FACB29B61C6811-806E
No fault code found.
-------------------------------------------------------------------------------
Address 15: Airbags (J234) Labels: 5K0-959-655.clb
Part No SW: 2H0 959 655 B HW: 2H0 959 655 B
Component: VW10Airbag00B H07 0013
Revision: -------- Serial number: 003HN0089MTP
Coding: 000000000000000000000000000000003042
Shop #: WSC 07446 790 50316
ASAM Dataset: EV_AirbaVW10BPAVN750 A01026
ROD: EV_AirbaVW10BPAVN750_VN35.rod
VCID: 336F078C9ACBA986591-8066
Crash sensor for side airbag; driver side:
Serial number: 3495RRB40691138A20JK
Crash sensor for side airbag; passenger side:
Serial number: 3505RRB405J134DQFHQ$
Crash sensor for front airbag; driver side:
Serial number: 3555YRB40084UHPKEHU1
Crash sensor for front airbag; passenger side:
Serial number: 3565YRB40064UHPKPPUJ
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels: 5K0-920-xxx-17.clb
Part No SW: 2H0 920 861 C HW: 2H0 920 861 C
Component: KOMBI H05 0605
Serial number: 00000000000000
Coding: 170200
Shop #: WSC 07456 790 50316
ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04716
ROD: EV_Kombi_UDS_VDD_RM09_SE35.rod
VCID: 2757E3DC5E13D526F59-8072
No fault code found.
-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels: 6N0-909-901-6R.clb
Part No SW: 6N0 909 901 HW: 6R7 937 086 M
Component: GW-K-CAN TP20 H28 0555
Revision: -3------
Coding: 742000
Shop #: WSC 07462 790 50316
VCID: F0E54880235D529EE43-80A5
No fault code found.
-------------------------------------------------------------------------------
Address 22: AWD Labels: None
Part No SW: 2H0 927 755 C HW: 2H0 927 755 C
Component: SG offroad VTG 0155
Revision: 00H07000 Serial number: T1IYC136215TSM
Coding: 0000013
Shop #: WSC 131071 1023 2097151
VCID: 30650880A3DD929E243-8065
No fault code found.
-------------------------------------------------------------------------------
Address 25: Immobilizer (J334) Labels: 5K0-920-xxx-25.clb
Part No SW: 5K0 953 234 HW: 5K0 953 234
Component: IMMO H05 0605
Serial number:
Coding: 000000
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03709
ROD: EV_Immo_UDS_VDD_RM09_VN35.rod
VCID: EAD15AE80D81A84EAA7-80BF
No fault code found.
-------------------------------------------------------------------------------
Address 32: Differential Locks (J647) Labels: 2H0-927-771.clb
Part No SW: 2H0 927 771 A HW: 2H0 927 771
Component: Quersperre H04 0017
Revision: 11001001 Serial number: 4DG 16.05.12 00
Coding: 000001
Shop #: WSC 00000 000 00000
ASAM Dataset: EV_QuersUDSAAMVN817 A01606
ROD: EV_QuersUDSAAMVN817.rod
VCID: 2C5D1CF047F5F67E18B-8079
No fault code found.
-------------------------------------------------------------------------------
Address 37: Navigation (J794) Labels: 1K0-035-27x-37.clb
Part No SW: 3C0 035 279 N HW: 3C0 035 279 N
Component: RNS315-EU H52 0319
Serial number: VWZAZ2M5927569
Coding: 000002110200150000031001
Shop #: WSC 07456 790 50316
ASAM Dataset: EV_RNS315EUV2UDS 001705
ROD: EV_RNS315EUV2UDS.rod
VCID: 2E5916F871E9846E36F-807B
Data medium:
Subsystem 1 - Part No: 3AA 919 866 A
Component: EUR_E_V8 0069
1 Fault Found:
1048580 - Function Restricted due to Insufficient Voltage
U1400 00 [008] - -
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 6
Fault Frequency: 1
Reset counter: 82
Mileage: 57207 km
Date: 2062.14.06
Time: 17:52:51
-------------------------------------------------------------------------------
Address 69: Trailer (J345) Labels: 1K0-907-383-MY8.lbl
Part No SW: 1K0 907 383 F HW: 1K0 907 383 F
Component: Anhaenger H09 0100
Revision: 3A001001 Serial number: 00008030189325
Coding: 0100000100000000
Shop #: WSC 00000 000 00000
VCID: 3065088063DD929E243-8065
No fault code found.
End ---------------------------------------------------------------------Re: Amarok Oem Bixenon retrofit
Posted: Sun Feb 11, 2018 8:38 am
Why don't you have activated the CCS? (engine, bcm)
By the way, the correct stalks (with your MFSW and ring) for your Amarok are 6Q0953513AK.
My next replies will be to explain the Bixenon headlights installation in your Amarok (June 2012 - January 2013). OEM.
By the way, the correct stalks (with your MFSW and ring) for your Amarok are 6Q0953513AK.
My next replies will be to explain the Bixenon headlights installation in your Amarok (June 2012 - January 2013). OEM.
Re: Amarok Oem Bixenon retrofit
Posted: Sun Feb 11, 2018 9:19 am
The BCM does not accept the coding for CCS. (Out of range message)
With the current stalks will not work the commands on the steering wheel? (for de mfd)
2H0920871X instrument cluster will work on my car with the new BCM?
Thank You!
With the current stalks will not work the commands on the steering wheel? (for de mfd)
2H0920871X instrument cluster will work on my car with the new BCM?
Thank You!
Re: Amarok Oem Bixenon retrofit
Posted: Sun Feb 11, 2018 9:28 am
For cruise control 6R0 937 087 is minimum.
Re: Amarok Oem Bixenon retrofit
Posted: Sun Feb 11, 2018 9:52 am
Hehe, I was distracted with multiple diagrams, sorry for my stupid question about the CCS with 086 BCM.
The new BCM Max have the latest software and can manage everything as long as it is the right one for your car.
The new BCM Max have the latest software and can manage everything as long as it is the right one for your car.
Re: Amarok Oem Bixenon retrofit
Posted: Sun Feb 11, 2018 9:56 am
It will happen exactly like this:georgenis wrote: Sun Feb 11, 2018 9:19 am With the current stalks will not work the commands on the steering wheel? (for de mfd)
viewtopic.php?f=56&t=58703&start=1080#p496280
You have to change the stalks by the ref indicated.
Re: Amarok Oem Bixenon retrofit
Posted: Sun Feb 11, 2018 10:07 am
7E0953503DB will work ok?
Re: Amarok Oem Bixenon retrofit
Posted: Sun Feb 11, 2018 10:11 am
No, those stalks need a more advanced electrical installation.
Re: Amarok Oem Bixenon retrofit
Posted: Sun Feb 11, 2018 10:15 am
They have to be without this
Re: Amarok Oem Bixenon retrofit
Posted: Sun Feb 11, 2018 11:06 am
Once we have the right BCM Max ...these are the steps to follow to correctly install the Bixenon headlights in...
Amarok 8K0, 8K1 (June 2012 - January 2013) Single cab, i.e. without rear doors.
First step
Instrument cluster (IC) - BCM
Isolate separately original wires T32/28 and T32/29 IC connector.
Install two new 0.5 mm2 wires from:
T32/28 to T73b/54 BCM white connector.
T32/29 to T73b/57 BCM white connector.
Second step
Front parking/side lights
Left
Isolate original wire T10/10 headlight connector.
Install new 0.5mm2 wire from T10/10 headlight connector to T73b/5 BCM white connector.
Right
Isolate original wire T10/10 headlight connector.
Install new 0.5mm2 wire from T10/10 headlight connector to T73b/6 BCM white connetor.
DRLs
Isolate original T17/3 light switch connector. Remove fuses SC26 and SC27.
Install new 0.5mm2 wire from T17/3 to T73b/29 BCM white connector.
Left
Isolate original wire T10/4 headlight connector.
Install new 0.5mm2 wire from T10/4 headlight connector to T73b/3 BCM white connetor.
Right
Isolate original wire T10/4 headlight connector.
Install new 0.5mm2 wire from T10/4 headlight connector to T73a/5 BCM black connector.
Third step
SC fusebox (72 positions)
BCM supply
Install new 2.5mm2 wire from SC53 fuse output to T73a/63 BCM black connector. New 25Amp fuse.
Install new 2.5mm2 wire from SC51 fuse output to T73b/68 BCM white connector. New 25Amp fuse.
Low Beam
Remove and isolate T17/7 light switch connector original wire.
Remove and isolate original input wires (yellow) from SC29 and SC55 fuses.
Left
Install new 1.5mm2 wire from T73a/2 BCM black connector to SC29 fuse input. Use the same fuse.
Right
Install new 1.5mm2 wire from T73b/2 BCM white connector to SC55 fuse input. Use the same fuse.
High Beam
Remove original 1.5mm2 wire (white/black) from SC30 fuse output.
Crimp/splice a new 0.5mm2 wire to this wire, carry this new 0.5mm2 wire to T73a/62 BCM black connector.
Install the original wire white black in its place/slot.
Lights for switches and instrument cluster/ 58 signal / Plate lights. (fix value)
Remove original wire T17/16 from light switch connector.
Cut the contact terminal and splice this wire (e.g. with a Butt terminal) to a new 1.0mm2 wire coming from T73b/4 BCM white connector.
With original T17/16 connected to T73b/4. (exclusively, as indicated)
Install a new 0.5mm2 wire from T17/16 light switch connector to T73a/45 BCM black connector (remove and isolate original T73a/45).
Fourth and last step
Code the new BCM Max according electrical installation. Once the electrical installation has been completed.
Old BCM coding (6R7 937 086 M)
640000380C210000002808102C4B84D40000410E60020000300000000000
New BCM coding (provisional, with new BCM Max)
640000380C21000000280CC12C4B84D42D00654E60021040300000020000
This new BCM coding will have to be modified if you installed the Cruise Control System or Static Cornering Lighs through fog lamps (recommended).
---
Amarok
Amarok 8K0, 8K1 (June 2012 - January 2013) Single cab, i.e. without rear doors.
First step
Instrument cluster (IC) - BCM
Isolate separately original wires T32/28 and T32/29 IC connector.
Install two new 0.5 mm2 wires from:
T32/28 to T73b/54 BCM white connector.
T32/29 to T73b/57 BCM white connector.
Second step
Front parking/side lights
Left
Isolate original wire T10/10 headlight connector.
Install new 0.5mm2 wire from T10/10 headlight connector to T73b/5 BCM white connector.
Right
Isolate original wire T10/10 headlight connector.
Install new 0.5mm2 wire from T10/10 headlight connector to T73b/6 BCM white connetor.
DRLs
Isolate original T17/3 light switch connector. Remove fuses SC26 and SC27.
Install new 0.5mm2 wire from T17/3 to T73b/29 BCM white connector.
Left
Isolate original wire T10/4 headlight connector.
Install new 0.5mm2 wire from T10/4 headlight connector to T73b/3 BCM white connetor.
Right
Isolate original wire T10/4 headlight connector.
Install new 0.5mm2 wire from T10/4 headlight connector to T73a/5 BCM black connector.
Third step
SC fusebox (72 positions)
BCM supply
Install new 2.5mm2 wire from SC53 fuse output to T73a/63 BCM black connector. New 25Amp fuse.
Install new 2.5mm2 wire from SC51 fuse output to T73b/68 BCM white connector. New 25Amp fuse.
Low Beam
Remove and isolate T17/7 light switch connector original wire.
Remove and isolate original input wires (yellow) from SC29 and SC55 fuses.
Left
Install new 1.5mm2 wire from T73a/2 BCM black connector to SC29 fuse input. Use the same fuse.
Right
Install new 1.5mm2 wire from T73b/2 BCM white connector to SC55 fuse input. Use the same fuse.
High Beam
Remove original 1.5mm2 wire (white/black) from SC30 fuse output.
Crimp/splice a new 0.5mm2 wire to this wire, carry this new 0.5mm2 wire to T73a/62 BCM black connector.
Install the original wire white black in its place/slot.
Lights for switches and instrument cluster/ 58 signal / Plate lights. (fix value)
Remove original wire T17/16 from light switch connector.
Cut the contact terminal and splice this wire (e.g. with a Butt terminal) to a new 1.0mm2 wire coming from T73b/4 BCM white connector.
With original T17/16 connected to T73b/4. (exclusively, as indicated)
Install a new 0.5mm2 wire from T17/16 light switch connector to T73a/45 BCM black connector (remove and isolate original T73a/45).
Fourth and last step
Code the new BCM Max according electrical installation. Once the electrical installation has been completed.
Old BCM coding (6R7 937 086 M)
640000380C210000002808102C4B84D40000410E60020000300000000000
New BCM coding (provisional, with new BCM Max)
640000380C21000000280CC12C4B84D42D00654E60021040300000020000
This new BCM coding will have to be modified if you installed the Cruise Control System or Static Cornering Lighs through fog lamps (recommended).
---
Amarok
Re: Amarok Oem Bixenon retrofit
Posted: Sun Feb 11, 2018 2:38 pm
The low beam and high beam and range button are working now. They cannot be left like now?