UK-POLOS.NET - THE VW Polo Forum

ciclo wrote: Tue Sep 12, 2017 6:33 pm

Good one, iichel.
-----
Also doing smart things.

Instead of buying a new TPMS unit with old software ...








280 km/h....

edinogti wrote: Tue Sep 12, 2017 12:51 pm hello ciclo
then I'll tell you what I would do
In practice I mounted pneumatic suspension with electronic management
I would like to make sure that once I close the car with the remote control the car will lower itself
for this I have already resolved by purchasing a timed relay card, which I have already tested and works perfectly
my problem is this
the impulse that I should give to my timed card I should take it only at the time of closing the machine
the problem is that in the wiring harness of the door lock if I receive the pulse from the closing wire the current arrives either with the open key or with the close button on the remote control you understand?
I would like to see if there is a single signal somewhere that will either turn on or off only when the car is closed
understand ciclo?

edinogti wrote: Tue Sep 12, 2017 9:42 pm Ciclo can you tell me something about what I wrote to you before?

Adam87 wrote: Tue Sep 12, 2017 8:19 pm [emoji23]if it doesn't work.... get rid and buy a new one to make it work, I like it Fernando [emoji106]

rdasadia wrote: Wed Sep 13, 2017 7:51 am @ciclo

ciclo wrote: Wed Sep 13, 2017 9:25 am

edinogti wrote: Tue Sep 12, 2017 12:51 pm hello ciclo
then I'll tell you what I would do
In practice I mounted pneumatic suspension with electronic management
I would like to make sure that once I close the car with the remote control the car will lower itself
for this I have already resolved by purchasing a timed relay card, which I have already tested and works perfectly
my problem is this
the impulse that I should give to my timed card I should take it only at the time of closing the machine
the problem is that in the wiring harness of the door lock if I receive the pulse from the closing wire the current arrives either with the open key or with the close button on the remote control you understand?
I would like to see if there is a single signal somewhere that will either turn on or off only when the car is closed
understand ciclo?

edinogti wrote: Tue Sep 12, 2017 9:42 pm Ciclo can you tell me something about what I wrote to you before?

I explain you:
I used the signal of the T28a/22 wire that I told you earlier to close the folding mirrors when close the car with the remote control (for my NO OEM installation of folding mirrors), everything worked correctly because the/my external module managed both signals. (Opening and closing).

I don't know if there is another signal in electrical system that be useful for what you want to achieve.

edinogti wrote: Wed Sep 13, 2017 11:49 am in fact with that module I could solve the problem. Where can I recover that form?

ciclo wrote: Wed Sep 13, 2017 7:21 pm

edinogti wrote: Wed Sep 13, 2017 11:49 am in fact with that module I could solve the problem. Where can I recover that form?

I do not understand correctly what you mean.
Hmm ...
viewtopic.php?f=56&t=58703&start=75#p472068
... in case it is useful for you.

ciclo wrote: Tue Sep 12, 2017 7:06 pm It will be installed on my 6R at my VW dealer, within a month, I guess.