Page 275 of 331
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Thu Feb 01, 2018 6:55 am
by iichel
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Thu Feb 01, 2018 11:31 am
by gtsportms
ciclo wrote: Thu Feb 01, 2018 4:54 am
You must post an autoscan so that I can guide you correctly. (open a new topic)
There is a good tutorial to do this installation, I think CNK or iichel have the link. (My PDC unit is from factory)
However, the next ones will be the wires that you will have to install correctly.
1-
+ve goes to the fuse16 in fuse box SB. It is a +15 signal.
2-
-ve goes to a ground point located on the left rear of the trunk.
3- CAN lines from PDC unit must be connected to the powertrain CAN lines. This will be the hardest part in terms of wiring.
Waiting autoscan to tell you how to...
The PDC unit coding can be 108001 or 308001 depending on whether you have RVC installed. (check my guide for RVC installation, first pg of this topic)
The OPS must be activated in the radio or navigation unit. The correct Bit will be indicated for POLO 6R on one of its Bytes. A reset must be done in headunit (RCD/RNS)
Also, a lot of info here
polo Mk5
Please link to know what you bought. Thanks.
http://www.vagbase.com/polo-9n-6q-6r-6c ... PQ25%206R0
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Thu Feb 01, 2018 6:26 pm
by ciclo
Let me thank you for the link
on behalf of the other users...
(for example, gtsportms)
OK. ('A' support OPS)
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Thu Feb 01, 2018 6:47 pm
by gtsportms
Oh danke Lovly Ichel, Du alter Schweizer
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Thu Feb 01, 2018 6:49 pm
by gtsportms
ciclo wrote: Thu Feb 01, 2018 6:26 pm
Let me thank you for the link
on behalf of the other users...
(for example, gtsportms)
Sorry i Was in a Hurry, my Siesta was going to end so i had to go.
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Thu Feb 01, 2018 6:55 pm
by iichel
gtsportms wrote: Thu Feb 01, 2018 6:47 pm
Oh danke Lovly Ichel, Du alter Schweizer
lol ich bin glücklich noch nicht so alt und ich bin auch kein Schweizer
ich wohne schon knapp 5 Jahre hier aber bin original von Holland
Ich hätte gerne wieder NL am Schild... nür links
---
like ciclo said, get the version A with OPS and I'm sure you'll manage with the guide. Keep in mind, there is a nice tool from VW to punch a 19mm hole in the bumper so you don't need to drill.
This way you can preserve the paint a bit better
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Thu Feb 01, 2018 7:15 pm
by ciclo
gtsportms wrote: Thu Feb 01, 2018 6:49 pm
Sorry i Was in a Hurry, my Siesta was going to end so i had to go.
I also want your thanks for my help ... (now a direct hint)
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sun Feb 04, 2018 11:45 am
by benzinkopf
Anyone knows the function output/input for T73b/28 from 7e0 bcm?
Sent from my iPhone using Tapatalk
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sun Feb 04, 2018 12:07 pm
by iichel
T73b/
28 Passenger SAFELOCK motor OR R LED module LED headlights only T14/14
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sun Feb 04, 2018 1:07 pm
by benzinkopf
iichel wrote:T73b/
28 Passenger SAFELOCK motor OR R LED module LED headlights only T14/14
Thanks iichel. Hurm. I dont see any relation to the two functions you mentioned. The reason i asked, i think i found out that I didnt ve that pin available originally with 087 bcm and the connection is also not there (missing wire pin7 from Passenger Door Lock connector).
But i have the safelock function enabled from factory.
Sent from my iPhone using Tapatalk
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sun Feb 04, 2018 1:15 pm
by iichel
it could be that the function is only found in certain vehicles (T5, T6, Polo, beetle, etc) and the function of a pin sometimes depends on the coding as well.
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Sun Feb 04, 2018 2:10 pm
by benzinkopf
iichel wrote:it could be that the function is only found in certain vehicles (T5, T6, Polo, beetle, etc) and the function of a pin sometimes depends on the coding as well.
Make sense! tq iichel. ill try connect the wire and see whats the diff[emoji848]
Sent from my iPhone using Tapatalk
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Fri Feb 09, 2018 12:25 pm
by Shishir
Hi Ciclo,
I am about to install RLS and auto dimming mirror(no buttons, like graaja has installed on his Polo) on my 2015 Polo (INDIA - 1.2 TSI).
Request you to please provide help regarding connection to T73b/24. Any resource on how I could connect wires to the connector?
Regards,
Shishir
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Fri Feb 09, 2018 1:00 pm
by iichel
If not occupuied: insert MQS (micro quadlock system) connector
If occupied: solder wire to it at BCM, alarm sensors in roof, humidity sensor for air conditioning (in mirror housing), sliding sunroof connector. Which ever may be present.
how to reach BCM connectors and how to open them:
https://drive.google.com/open?id=0BxYPV ... 1Jib0N1STQ
Re: ciclo's Polo. R-line 1.2 TSI 90hp 119gr.
Posted: Fri Feb 09, 2018 5:16 pm
by ciclo
Introduce a soldering iron with 300-600 ºC inside a car is something that I would never do.
Crimping is a more reliable solution.