UK-POLOS.NET - THE VW Polo Forum

Great!

http://www.team-bhp.com/forum/diy-do-yo ... ost3658459

The Light Assist icon is different from mine.


Lately I detect new software in the instrument cluster.

Address 17: Instruments (J285) Labels: 5K0-920-xxx-17.clb
Part No SW: 6RD 920 870 A HW: 6RD 920 870 A
Component: KOMBI H05 0805

Please send me the requested information by email. Thanks.

Ambient light sensor in VW polo High line Cluster.

https://youtu.be/2smt42e1_gU

Required Conditions

1 Complete darkness. No lights at the sides of the road (city, villages, streetlights, etc).
2 Light switch in Auto.
3 Activated the system with the stalk (icon on the screen)
4 Higher speed of 40 Km/h.

govindsharma wrote:Ambient light sensor in VW polo High line Cluster.

https://youtu.be/2smt42e1_gU

The original screen protector decreases the sensor performance. Remove it.

VW polo 6R High Beam Assist that works very charm.Its small clip because its very difficult to upload big one.
https://youtu.be/do03XmX79Qc

Thanks to Ciclo Sir for making my POLO so unique and only one in North India i think.

govindsharma wrote:VW polo 6R High Beam Assist that works very charm.Its small clip because its very difficult to upload big one.


Thanks to Ciclo Sir for making my POLO so unique and only one in North India i think.

Despite the lighting circumstances and low speed is a perfect video. Thank you for sharing.
(I know it's difficult to make a good video without the right tools and conditions)

Your 6R is now safer and comfortable to drive. Enjoy it.

Ciclo Sir please tell me what is W in circle in this IC can i also get this and what i need to get this.I think as i saw it is sign of direction.

Westward

It is the compass, coming from the navigation unit (usually).

Good Evening Sir
Sir Is my car has this function ?
Static cornering light activation threshold changed from 40 to 55kph

If no please tell me how can i activate it ?

Thank you.

Yes. I sent you all the information by email. (long ago)

However, I send it to you again. Check your email.

Hello Sir,

Thanks for the PM. Since I am newbie here, could not reply to your PM. Request you to PM me your email id or mobile number to discuss further.

To install DRLs on your 6R IND with BCM Max and automatic lights, etc ... you need:

- the signal wire to activate DRLs, from the light switch to the BCM, which is already installed (included in my wiring that I sent you ).
- the wires from the BCM to the DRLs. http://www.ebay.de/itm/VW-Polo-6R-6C-Ka ... 2ed2ccbfc4
- fog lights with additional bulb for DRLs. 6C0941661, 6C0941662 ... e.g search here
- bulb carrier (4) + bulb (6) for DRLs.


Hmm... bulb, search for 'w21w white Led error free (osram, philips)'

Dear Sir Good Morning tell one thing that if i will deploy new fog light with drls and static cornering light, then i have to remove present fog light harness and install new one or new harness is separate for DRLS.

Thank you.

govindsharma wrote: ↑Tue Aug 29, 2017 4:25 am Dear Sir Good Morning tell one thing that if i will deploy new fog light with drls and static cornering light, then i have to remove present fog light harness and install new one or new harness is separate for DRLS.

Thank you.

New harness is separate for DRLS

All you have to do is connect the wiring from the BCM to the new daytime running lights, and install your new foglamps with DRLs.
The original wiring for the fog lights/cornering lights remains intact.

New BCM coding is required, but you know this is not a problem for us.

Dear Sir I had purchased fog lights with static cornering lights and day time running lights 6C0941661 and 6C0941662. Now tell me in which bcm connector wire must be connected and coding for it.

Thank you