UK-POLOS.NET - THE VW Polo Forum

hmthakur wrote: Sun Jan 14, 2018 2:20 pm Is it a Audi part?? Manufacturing dates are 2010,11,12


Sent from my iPhone using Tapatalk

Polo 6R Europe, 2010-->2014

hmthakur wrote:Is it a Audi part?? Manufacturing dates are 2010,11,12


Sent from my iPhone using Tapatalk

Hrishikesh wait till vw launch 2018 polo in India it may come with full led lights all parts will be available in India
Vento comes with afs but it's mountings are different

Sent from my Pixel 2 using Tapatalk

Enquired about 2018 polo, but they don’t have any clue


Sent from my iPhone using Tapatalk

I am not interested in led headlights as they don’t give enough light and spread.


Sent from my iPhone using Tapatalk

hmthakur wrote:I am not interested in led headlights as they don’t give enough light and spread.


Sent from my iPhone using Tapatalk

AFS setup is same for led and bixenon headlights..

Sent from my Pixel 2 using Tapatalk

Hi ciclo
When installing bcm high i will have to isolate two can wires from instrument cluster, will these wires will be live i.e. will these wires be connected to bcm?? Can i us these wires for OPS, AFS?? Can we make a connector like two wires to four.??


Sent from my iPhone using Tapatalk

Yes the old wires to IC are powertrain canbus high and low.
They will still be live. You can use them for PDC/OPS, AFS, TPMS high etc.

Can we make a connector like two can wires in to six out wires connections


Sent from my iPhone using Tapatalk

yes of course, but think about the limited space available behind the IC in your choice of connector.

What connectors do you suggest??


Sent from my iPhone using Tapatalk

Well, it seems that you are going to set up a worldwide communications network in your 6R , therefore, the connectors that best suit your taste/possibiities/neededs/tools and are within your reach...

Yesterday was 19, today is 20, and tomorrow 21, the 21 is a good day to ...

Hi hmthakur, how's your electric installation going?

Remember that in order for everything to work properly it's necessary to code the new BCM.

When you need it request me here the new BCM coding, by telling me all the new equipment installed so far.

Can anybody please confirm if afs control module from 2012 gti 6r having vin no. WVWZZZ6RZCY239904 Will fit polo 6r?? Part no is 6R0907357


Sent from my iPhone using Tapatalk

hmthakur wrote:Can anybody please confirm if afs control module from 2012 gti 6r having vin no. WVWZZZ6RZCY239904 Will fit polo 6r?? Part no is 6R0907357


Sent from my iPhone using Tapatalk

Sure. As long it’s coming from polo


Sent from my iPhone using Tapatalk

I think it will also depend on what sensor you're planning to put on the rear axle. As far as I understood, there are several types of sensor with different sampling frequencies. This needs to match with the AFS control module.