Page 1 of 1
How Do You De-Badge a 9N?
Posted: Tue Sep 23, 2003 6:47 pm
by polomk6
hello,
i was wondering if any1 could tell me how to de-badge the back of my polo, which has POLO and TDI,
i've heard that you use a hairdryer ?
HELP!
thanks steve
Posted: Tue Sep 23, 2003 6:51 pm
by mole
Ok quickly as its been done before many times!
Using a hair dryer heat up the badge. I'd suggest doing it in a garage or on a warm day - not outside on a winters night!
Then slowly using some dental floss/cotton, behind the badge, work your way down "sawing" the adhesive. Then you'll be left with some adhesive on the bodywork. This will come off with a bit of work, and as long as you're careful, won't cause any damage at all.
Hope this helps mate.
Mole
Posted: Tue Sep 23, 2003 7:55 pm
by Scorpio1
Noooo!!
Keep the TDI badge!
Question
Posted: Wed Sep 24, 2003 8:57 pm
by polomk6
how do u get the adhesive on the bodywork off ?
Posted: Wed Sep 24, 2003 9:02 pm
by mole
I used WD40 - yes WD40!
It get's everything off! And then finished it off with T-Cut. Perfect
De-Badged Successfully!
Posted: Sun Oct 05, 2003 11:13 am
by polomk6
I de-badged it ok, used WD-40, came off ok , no problems,
thanks mole
Posted: Mon Oct 06, 2003 11:47 am
by mole
Glad it worked ok!
Mole