Page 1 of 1
4 stud to 5 stud
Posted: Tue Jan 02, 2007 8:41 am
by mattyy
Guys,
I need some advice!!!
I have an X reg 1.4Tdi polo, and I have just bought brand new Audi TT 17inch 5 spoke alloys from a showroom for Dirt cheap!!
But its a 5 studed alloy...
So how the heck do I fit it on the polo, which is 4 studed????
Advice needed!!
Mattyy
North London
Posted: Tue Jan 02, 2007 11:10 am
by omicron
Either hub adapters, or sell the TT wheels for a profit on ebay and buy some that fit natively.
Posted: Tue Jan 02, 2007 11:11 am
by carmadaaron
venom motor sporttttttt
Posted: Tue Jan 02, 2007 12:24 pm
by mattyy
Thats the one!!!!
sweeeeeeeeeet!!!!
that is quality,
now what mm do i need???
Re: venom motor sporttttttt
Posted: Tue Jan 02, 2007 1:36 pm
by Dee-vub
mattyy wrote:Thats the one!!!!
sweeeeeeeeeet!!!!
that is quality,
now what mm do i need???
The 25mm one, That means whatever the offset of the wheels are......take 25 from that, and you have your new offset, which i think is gonna be very low...and those TT 17's are gonna scrub SOOOOOOO bad!
Posted: Tue Jan 02, 2007 2:01 pm
by mattyy
bruv,
tell me it aint gonna rub badly....is it???
the wheels are really nice aswell!!
Maaan, im upset now
Posted: Fri Jan 05, 2007 5:27 pm
by mattyy
After ringing and speaking to various car shops, i have been advised that H&R are crap quality, and that some haven't even heard of PCD Adapters.
What the f**k?!?!?
i might just be better off selling the wheels off.
(
Posted: Fri Jan 05, 2007 5:52 pm
by vdubit
Whats the offset and width of the wheel? Will be on the back, should be something like et35 or e35. It should also say 7j or similar. Let me know and i'll tell you if it'll scrub.
Also, sorry to say this, but polo's look pants on 17's
Posted: Fri Jan 05, 2007 5:54 pm
by Dee-vub
vdubit wrote:Whats the offset and width of the wheel? Will be on the back, should be something like et35 or e35. It should also say 7j or similar. Let me know and i'll tell you if it'll scrub.
Also, sorry to say this, but polo's look pants on 17's
Yeh id say something similar to that offset, and a polo on 17's with on et10......is defo gonna scrub!!! With any amount of lowering.
Posted: Sat Jan 06, 2007 12:02 am
by mattyy
The audi wheels are 7.5J x 17 ET 56
i have also just bought another set of wheels...i know im so broke aswell!!
BBS rims with the following code: ET35RS715,
these are 4 stud, 7J x 17H2
will these fit on the polo??
remember my polo is a 1.4tdi so it has standard suspension.
Mattyy
North london
ps- pics comin soon of the angel ring headlights and retro h7 xenon kit installed. ;o)