Project 6N! (update bottom of page 2)

benji-d · Post by **benji-d** » Sun Jan 28, 2007 5:44 pm

Hi im new to this site and new to vw polo's,

iv just brought a 6n and have started to modify

Here's some pics so far...

I CANT BELIEVE HOW MUCH PLASTIC IS IN THESE THINGS

My plans are as follows:

Fully Strip the interior hammerite or spray the whole inside lower on coilovers 100mm plus small deep dish alloys, iv ordered a badgeless front grille rear strut barce and bucket seats with harnesses.

I know all this sounds silly as its only a 1.0ltr and would usually be done to decrease weight etc but i just think a fully stripped car with 2 bucket seats and harnesses go really well.

Any suggestions and ideas are welcome as again i am new to polo's

vdubyabush · Post by **vdubyabush** » Sun Jan 28, 2007 11:27 pm

welcome dude

mysteryboy · Post by **mysteryboy** » Mon Jan 29, 2007 1:50 am

you're heading in the right direction... plans sound great

welcome

DanDiesel · Post by **DanDiesel** » Mon Jan 29, 2007 8:36 am

welcome to the forum!! plans sounds interesting!! keep us posted!

6NBen · Post by **6NBen** » Mon Jan 29, 2007 4:45 pm

welcome mate... nice colour..keep us updated.

polopaul · Post by **polopaul** » Mon Jan 29, 2007 9:49 pm

welcome along mate

benji-d · Post by **benji-d** » Mon Jan 29, 2007 9:55 pm

Thanx for the welcomes guys, il keep ya posted. ^ not you again polopaul

bobtknob · Post by **bobtknob** » Mon Jan 29, 2007 11:43 pm

sounds like a fun car
wish i had the bottle to rip the back end out of my car
theres stil time i spose
gonna be interested to see how it turns out
and welcome mate

shantybeater · Post by **shantybeater** » Tue Jan 30, 2007 9:36 am

welcome mate

benji-d · Post by **benji-d** » Tue Jan 30, 2007 1:21 pm

Cheers for the warm welcome peeps

Dunn · Post by **Dunn** » Tue Jan 30, 2007 5:18 pm

Hello mate welcome to the forum, looks like your off to a good start there,

A pic of mine when i did this

The only problem is it makes the back end really light

benji-d · Post by **benji-d** » Tue Jan 30, 2007 9:54 pm

Awesome mate

iv now taken the whole carpet out front to back all door cards and all plastic lol

Yu know that feeling of i hope im not making a mistake here.. well thats been runnin through my mind lately!

But to be honest i think it will look the way i want in the end its just a pretty extreme time at the min as its all happening at once.

What engine you got in yours mate?

Dee-vub · Post by **Dee-vub** » Tue Jan 30, 2007 10:16 pm

Tha t looks awesome mate. Good to see something different from the norm!

Dunn · Post by **Dunn** » Wed Jan 31, 2007 7:55 pm

Its only a 1.4 8v at the mo got a new engine going in soon,.

But thats abit hush hush at the mo

benji-d · Post by **benji-d** » Sun Feb 04, 2007 4:52 pm

Rite another busy weekend peeps!

First of all a good clean was needed...

Then for a few shiny bits to be masked up

Then bring out the hammerite

Well pleased with the outcome the matt black looks awesome and takes your eyes off all the little screw holes etc.

Then for the badgeless grille to be fitted...

Makes such a difference to the front end..

Iv now started to take the old front seats out to make way for the buckets..

These are the seats im going to get with harnesses,. But thats another chapter

...