History of polo 86C by AngelOfDeath_200 :)
-
- New
- Posts: 9
- Joined: Sat Mar 10, 2007 10:31 am
History of polo 86C by AngelOfDeath_200 :)
Hello. It's my first post in this forum.
I would like to tell you something about my polo.
He cost me ~375€. It has a 1048 engine and 45KM, but previous owner show me diagram, and i saw that my car have 55KM .
condition my car was quite good. without delay i wos:
change all tire
fix my seat
change my front suspension (2xtrack control arm, tie rod /left/right etc)
repair my fuel tank
And i was fix another details.
Afterwards I :
change springs -60/0
to put on cone air filter
remove white lines and txt FOX
paint front grill on mat black
to put on the something what is under front bumper (it's very dificult to say for me but this "thing" comes from Golf MKII )
to put on burglar alarm
darken my back light on red&black and indicator on black,
back window is darken on quite dark black
change distributor cap , rotor for distributor, battery, ignition lead, carburetor, voltage regulator, steering wheel (WV vento). and many many another things.
Car audio:
yes i have hyhy
radio 4x50W with mp3
tweeter boss
subwoffer dibeisi 150W rms
3 weeks ago i was bought new rims, with ET 18
plans for the future ?? hmm, tire 165/65 , tailgate without emblem, electric window, sits for hmm golf III/vento, front lamp clean or xenon, and something else this car will be never ending story
Ok now some pictures
before -60 springs
after -60 springs
inside my car
and another fotos
that's all I'll be gratefull for any opinion negative or positive
and i wont to sorry for my English, but isn't my native language.
greetings
I would like to tell you something about my polo.
He cost me ~375€. It has a 1048 engine and 45KM, but previous owner show me diagram, and i saw that my car have 55KM .
condition my car was quite good. without delay i wos:
change all tire
fix my seat
change my front suspension (2xtrack control arm, tie rod /left/right etc)
repair my fuel tank
And i was fix another details.
Afterwards I :
change springs -60/0
to put on cone air filter
remove white lines and txt FOX
paint front grill on mat black
to put on the something what is under front bumper (it's very dificult to say for me but this "thing" comes from Golf MKII )
to put on burglar alarm
darken my back light on red&black and indicator on black,
back window is darken on quite dark black
change distributor cap , rotor for distributor, battery, ignition lead, carburetor, voltage regulator, steering wheel (WV vento). and many many another things.
Car audio:
yes i have hyhy
radio 4x50W with mp3
tweeter boss
subwoffer dibeisi 150W rms
3 weeks ago i was bought new rims, with ET 18
plans for the future ?? hmm, tire 165/65 , tailgate without emblem, electric window, sits for hmm golf III/vento, front lamp clean or xenon, and something else this car will be never ending story
Ok now some pictures
before -60 springs
after -60 springs
inside my car
and another fotos
that's all I'll be gratefull for any opinion negative or positive
and i wont to sorry for my English, but isn't my native language.
greetings
-
- New
- Posts: 9
- Joined: Sat Mar 10, 2007 10:31 am
-
- Silver Member
- Posts: 255
- Joined: Sat Feb 11, 2006 10:01 pm
- Location: ashford,kent
- Contact:
-
- New
- Posts: 9
- Joined: Sat Mar 10, 2007 10:31 am
i cant lost my wheel caps becaus i have 2xrims for golf II and 2x rims for the polo hyhy but soon i'll put on my new rims and boast you
can somebody tell mi what is the name ?? because i can't foud enywhere this nameto put on the something what is under front bumper (it's very dificult to say for me but this "thing" comes from Golf MKII )
-
- Getting There!
- Posts: 50
- Joined: Fri Feb 16, 2007 11:48 am
- Location: oxford
how did u fix the front splitter on? it looks really cool and i want to do it on my polo.
p.s how does every one get the piture of their car at the bottom of their posts?
(done it now)
p.s how does every one get the piture of their car at the bottom of their posts?
(done it now)
Last edited by 89_polo_squareback on Wed Mar 14, 2007 4:35 pm, edited 1 time in total.
-
- New
- Posts: 9
- Joined: Sat Mar 10, 2007 10:31 am
hmm ist's easy. it's front splitter from golf II, if you want to put it in your car you should adjust this and cut on left and right. (about 3") and then tou ought to drill about 5 wholes (one whole on left and right and three wholes on front). it is not hard.
if you want to put your pictures bottom your post you must:
click profile --> and then you'll see signature ant then you must past your link of your pictures there. but first you must send your pictures on http://imageshack.us/
good luck
if you want to put your pictures bottom your post you must:
click profile --> and then you'll see signature ant then you must past your link of your pictures there. but first you must send your pictures on http://imageshack.us/
good luck
-
- New
- Posts: 28
- Joined: Thu May 11, 2006 6:56 pm
- Location: Stratford-Upon-Avon
- Contact:
-
- New
- Posts: 9
- Joined: Sat Mar 10, 2007 10:31 am