UK-POLOS.NET - THE VW Polo Forum

I HAVE A MK4 POLO 6N REAR AXLE WITH MK3 GOLF STUB AXLES. IT IS RUNNING DISCS AND CALIPERS SO YOU CAN MAKE THE CONVERSION FROM DRUMS TO DISCS ON YOUR 6N.


THIS IS ALREADY TO GO ON. THE AXLE AND CALIPERS HAVE BEEN CLEANED AND THEN A GENEROUS LAYER OF HAMMERITE. I HAVE THE HANDBRAKE CABLES, NEW AXLE BUSHES TO GO IN TO REPLACE THE OLD ONES. IT ALSO COMES WITH BRAIDED BRAKE LINES THAT WERE MADE UP TO FIT FROM THE ORIGINAL LINES TO THE BACK OF THE CALIPER. PRETTY MUCH JUST NEED TO SWAP OVER THE AXLES AND CONNECT EVERYTHING UP!!

HAVE HAD A CHANGE IN DIRECTION WITH THE CAR SO WONT BE NEEDING THIS ANYMORE.

MIGHT HAVE A G60 FRONT SETUP FOR SALE SOON, BUT NEED TO GET THEM OFF THE CAR AS HAVE BEEN USING THEM

LOOKING FOR £250
EMAIL - [email protected]

Im interested, but will the axle fit a 6n2 (not that im bothered, as id just use my axle anyhow)

Cheers

Alex

I am not too sure what the difference is, if any. Best thing would be to ask someone on here or just go to VW and ask for pictures of both axles and see if there is any difference.
Only worked on my 6n so not too sure about the 6n2.
You can always just swicth stub axles, but I am selling it as a ccomplete item, not splitting it up.

if youll take £200 and ill collect ill do it

any news on this mate - really interested as previously posted.

Cheers

Alex

Sorry, Christmas and all!! I would need the £250. Already loosing enough on it! Happy for you too collect or can meet half way I dont mind! Well depending where you are, lol

If youll meet halfway, ill do it buddy I have to go up that way on the 3rd of january - hows that sound for you?

Well I am back at work on the 3rd so would only be able to do it in the evening. If you want to do it before then, can meet on the weekend if thats any good for you? Was thinking somewhere around Basingstoke, open to ideas!
Think my email ad is on the first post, got to head off now!

hmmm...interesting?!

would this fit a mk4 16v?

Most likely. I would think the rear axles are the same, but would be best to check!

Im still gonna take this.....when I get paid at the end of this month hopefully

No problem, is all yours. Would you be interested in a rear valence at all? Is for a 6n,not sure if the parts would be the same. Would throw it in with the brakes.

you mean bottom skirt on the rear bumper? or the actual bumper?

the bottom bit

can you snap a pic of it Im not too sure which bit it is without seeing it!