GTI Dials ?

Prabz · Post by **Prabz** » Tue Apr 15, 2008 12:46 am

Hi guys i went to start my polo up today started fine for the first five minutes. Soon after the dials all the lights starting flashing and the rev counter ,tempter needle and petrol needle whet higher. So i switched the car off then started a little while after, same problem. What is this problem ?

Tim_GTi · Post by **Tim_GTi** » Tue Apr 15, 2008 4:00 am

I have no idea mate, but a run through vagcom should be able to tell you straight away.

tegwin · Post by **tegwin** » Tue Apr 15, 2008 9:17 am

Hmm....Could be an ECU error, or a voltage regulator issue.....Try Vagcom!

Prabz · Post by **Prabz** » Tue Apr 15, 2008 12:03 pm

Yep will get someone to run there computer on the car, Even when the car is switched off the rev counter don't drop down drops down to 2 and stays there petrol and temp when swicthed off stick at half no under really werid