Page 5 of 5
Re: How to install RClick Remote Central Locking Kits
Posted: Tue Apr 26, 2022 7:26 pm
by alexperkins
Your scotch locks may not actually be terminating properly. It’s easy for that to happen
If the box is clicking you don’t have an earth issue on that part of the box, or it wouldn’t click at all
Re: How to install RClick Remote Central Locking Kits
Posted: Tue Apr 26, 2022 7:28 pm
by alexperkins
Check your yellow/black wires to earth also as per the guidance and make sure this is well connected
Re: How to install RClick Remote Central Locking Kits
Posted: Tue Apr 26, 2022 7:45 pm
by Hoydonk
Thanks for all the help, it was a bad earth
Re: How to install RClick Remote Central Locking Kits
Posted: Tue Apr 26, 2022 7:51 pm
by alexperkins
Perfect. Glad it’s working
Re: How to install RClick Remote Central Locking Kits
Posted: Thu Apr 27, 2023 2:39 pm
by kux94
Hi I have a polo n9. And done as shown
I am able to unlock the car. But not lock it. Any suggestions?
Re: How to install RClick Remote Central Locking Kits
Posted: Thu Apr 27, 2023 3:02 pm
by alexperkins
Likely an issue with your resistor. Did you follow the 9N guide?
Re: How to install RClick Remote Central Locking Kits
Posted: Wed Aug 02, 2023 2:35 pm
by Knoob00
Havent bought it yet but does anyone know if this kit
https://rclick.co.uk/shop/index.php?id_ ... er=product (same as the purple update on the original post) is 100% plug and play on a 6N2? Not really fit for the whole splicing thing...
Also what kind of transponder chip would I need to clone my existing one?
Re: How to install RClick Remote Central Locking Kits
Posted: Thu Aug 03, 2023 9:29 am
by alexperkins
Yes that’s plug and play
You are best to move your transponder from your existing key into the new flip key. These transponders aren’t that easy to source any more