BMC DIA INDUCTION KIT

matt_123 · Post by **matt_123** » Wed Jun 22, 2011 5:41 pm

BMC DIA 85-150, like the CDA but plastic rather than carbon, and has exactly the same filter and technologies inside. comes with a silicone elbow (got seperate) and fitting bracket with few screws.
£100

matt_123 · Post by **matt_123** » Thu Jun 23, 2011 3:04 pm

M54 SINGH · Post by **M54 SINGH** » Thu Jun 23, 2011 5:57 pm

picccyss please

matt_123 · Post by **matt_123** » Thu Jun 23, 2011 7:17 pm

only one ive got mate !

M54 SINGH · Post by **M54 SINGH** » Thu Jun 23, 2011 10:08 pm

how good isit?
in regards to throttle response and sound wise aswell?

matt_123 · Post by **matt_123** » Thu Jun 23, 2011 11:15 pm

mate ive had both the cda and the dia bmc induction kits and cant telll the difference in either, both awsome at noise at high rpm's and nice growl under load at going up through the rev range ive got a straight through exhaust still with cat in and can hear it singing over the exhaust note! - throttle response is greatly improved over standard air box..

M54 SINGH · Post by **M54 SINGH** » Fri Jun 24, 2011 6:40 pm

where abouts are you mate?

matt_123 · Post by **matt_123** » Fri Jul 01, 2011 5:27 pm

BUMP for a decent induction kit

matt_123 · Post by **matt_123** » Thu Jul 07, 2011 9:23 am

UPP! £100 posted

matt_123 · Post by **matt_123** » Mon Jul 11, 2011 10:22 am

£100 posted..

BUMP new week

matt_123 · Post by **matt_123** » Fri Jul 15, 2011 9:16 am

BUMPITY! BUMP!

benmkiv · Post by **benmkiv** » Fri Jul 15, 2011 10:22 am

Know of this will fit the 1.0 polo 6n2?

matt_123 · Post by **matt_123** » Fri Jul 15, 2011 3:08 pm

yes mate it will with a reducer

benmkiv · Post by **benmkiv** » Fri Jul 15, 2011 5:40 pm

Tempting lemme check thhe bank and look for a reducer

matt_123 · Post by **matt_123** » Fri Jul 15, 2011 9:42 pm

ok mate sure thing

UK-POLOS.NET - THE VW Polo Forum