312mm Brake conversion 5 x 100.
This includes 2 reconditioned 312mm brake calipers and carriers, powdercoated in red
(Purchased from GBAutomotive on Ebay in 2012) - Cost me £195
Brembo 312mm plain discs and Brembo matching brake pads (with sensor wire) - Cost me £125
These will fit the Polo 9N3, Fabia MK1 vRS, Fabia mk2 vRS (I think) and others.
I had these fitted to my 2007 Polo GTi 1.8 after a stage 1 map, they were on the car for 6 months, 3000 miles before I put it back to standard and traded it in for a 2007 Mk1 Fabia vRS. The car was just used for commuting and never tracked etc.
I intended to keep these and fit to my Fabia, but as the clutches/turbos are made out of chocolate I have decided not to tweak this one, so I am leaving the standard brakes on it.
Pics:
Pad measurements
Accurate Disc measurements
I will re-photo these if needed with some digital verniers, but they are near enough 25mm thick.
My above camera skills make it look more like 24mm thick.
13/05/13 - Edited with vernier caliper photos, when new the discs are 25mm.
If you need any high res photos please get in touch.
Price £200 collected from the Lincoln area.
If I get no interest I'll look into posting, but they measured 29kg on the bathroom scales so it may be expensive.
Email me at vwbogwoppit@hotmail.com or pm me if interested.
