Wiring LED's to a 12V source.
Posted: Sun Jun 20, 2004 12:20 am
I'm cuurently in the process of making some LED tube lighting for my footwells and would like your suggestions on a couple of points.
1. should i wire it up so they're only on when my sidelights are on.
2. should i put in a switch so i can turn them on and off.
3. where's the best place to wire them to.
I had a look behind my climate control compartment and found a few wires, but i haven't a clue which one to take a feed from for the LED's.
Any help, suggestions/advice would be appreciated.
1. should i wire it up so they're only on when my sidelights are on.
2. should i put in a switch so i can turn them on and off.
3. where's the best place to wire them to.
I had a look behind my climate control compartment and found a few wires, but i haven't a clue which one to take a feed from for the LED's.
Any help, suggestions/advice would be appreciated.