Page 1 of 6
Lowering polo 6r
Posted: Wed Jan 29, 2014 1:21 pm
by peeetz
hi im looking at lowering my 2011 polo on springs not coilovers...just wondering what people opinions are on which ones to get.
not wanting it low low just to make it look slightly better, i was looking at some of the H&R springs but not sure...
post pictures of what you are running and let me know what they are on.
thanks
Re: Lowering polo 6r
Posted: Wed Jan 29, 2014 2:36 pm
by C17LJR
My wife's polo is on the H&R kit, plenty pics and opinion in here
http://www.uk-polos.net/view ... 56&t=59217
Re: Lowering polo 6r
Posted: Wed Jan 29, 2014 8:43 pm
by peeetz
thanks. so you have H&R 30/55mm? with 17" alloys?
Re: Lowering polo 6r
Posted: Wed Jan 29, 2014 10:16 pm
by C17LJR
Yes and yes

Re: Lowering polo 6r
Posted: Thu Jan 30, 2014 6:45 pm
by greypolo9n3
In my opinion...the 25/40 from h&R is better....not a big difference + much better ride
With 17'inch et41 wheels ...215/45/17 tyres
Lowering polo 6r
Posted: Fri Jan 31, 2014 7:06 am
by Jerry77
I think that 55mm at rear is to much for stock shocks. I have VWR sport springs and they are - 15mm.
Sent from my iPhone using Tapatalk
Re: Lowering polo 6r
Posted: Fri Jan 31, 2014 11:02 pm
by greypolo9n3
Jerry77 wrote:I think that 55mm at rear is to much for stock shocks. I have VWR sport springs and they are - 15mm.
Sent from my iPhone using Tapatalk
Your very right...my old one was 50mm...and omg the ride was absoloutely shocking
You should go for the 25/40 H&R ...best springs setup hands down
Re: Lowering polo 6r
Posted: Sat Feb 01, 2014 5:47 pm
by JayW
How much was the fitting for your lowering springs? Been quoted £25 a corner!
Re: Lowering polo 6r
Posted: Sat Feb 01, 2014 7:27 pm
by aaronon
I've ordered 17 alloys for my stock Polo. . .i've decided to go for the VW approved lowering springs with 215/40/17 tyres.
£309 including fitting at VW dealers.
Re: Lowering polo 6r
Posted: Sun Feb 02, 2014 2:15 am
by greypolo9n3
haggle down to £20 a corner and thats about a standard rate really
i fitted mine myself

..
and omg...£309 for springs and fitting

....and the VW ones are 30mm all round?..
30mm is too much for the front on 17's in my opnion...
Re: Lowering polo 6r
Posted: Sun Feb 02, 2014 4:09 pm
by aaronon
Why is it too low? Will my wheels not fit on? :O:O:O
Is the GTi not 30mm with 17inchers?
Lowering polo 6r
Posted: Sun Feb 02, 2014 4:31 pm
by Jerry77
GTI is only -15mm. VWR made by Eibach.
Sent from my iPhone using Tapatalk
Re: Lowering polo 6r
Posted: Sun Feb 02, 2014 6:12 pm
by aaronon
Re: Lowering polo 6r
Posted: Sun Feb 02, 2014 6:21 pm
by greypolo9n3
Hahahahahahaha dont worry!!...depends on the offset and width of your wheels though
it shouldnt be a problem...you may hear a slight scrape here and there but nothing to cause any damage
I had 215 45 17's and my wheels are 7j ET41 ....that made a little scrape sound over big wallowy parts of the road and thats about it really
Now ive put 205/45/17's and it looks far better too!
Let me know your wheel width and offset
Re: Lowering polo 6r
Posted: Sun Feb 02, 2014 6:25 pm
by JayW
greypolo9n3 wrote:haggle down to £20 a corner and thats about a standard rate really
i fitted mine myself

..
and omg...£309 for springs and fitting

....and the VW ones are 30mm all round?..
30mm is too much for the front on 17's in my opnion...
I think you should come do me a MASSIVE favour and install some coilovers for me
