Page 18 of 33
Re: Polo 6R ABS CODING
Posted: Fri May 22, 2020 6:10 pm
by iichel
There is no factory option to match this configuration
Re: Polo 6R ABS CODING
Posted: Fri May 22, 2020 7:19 pm
by theweekendmech
Can I run the 310 front and rear disc coding for now? What would be better? Run it on the current coding or switch to either a 288 front and drum rear coding or 310 front plus rear disc coding?
Re: Polo 6R ABS CODING
Posted: Fri May 22, 2020 7:33 pm
by iichel
I'd suggest to code it to 288mm fronts and 200mm rear drums. Adding discs will probably improve braking stability but unless you actually fit a WRC or GTI engine, you won't be able to code it to 310mm discs
Re: Polo 6R ABS CODING
Posted: Fri May 22, 2020 10:52 pm
by theweekendmech
iichel wrote: ↑Fri May 22, 2020 7:33 pm
I'd suggest to code it to 288mm fronts and 200mm rear drums. Adding discs will probably improve braking stability but unless you actually fit a WRC or GTI engine, you won't be able to code it to 310mm discs
thanks a Ton for the suggestion iichel. Can you please give me the code thats gonna match my polo? I can barely find any working codes for indian spec polos
Re: Polo 6R ABS CODING
Posted: Sat May 23, 2020 10:14 am
by iichel
Sure thing
Could you please try just to enter these two codes to see if they are accepted?
62DD6863422703C5461B16714259C0800904 312mm + 232mm
62DD7863422703C5461B1E714259C0800904 312mm + 256mm
Suggestions for your car:
62DD4463422703C5461B22714259C0800904 288mm + drums (option 1)
62DD4863422703C5461B12714259C0800904 288mm + drums (option 2)
You can try the latter two codes, they both appear in the factory configuration of 288mm fronts and rear drums.
Re: Polo 6R ABS CODING
Posted: Sat May 23, 2020 4:41 pm
by theweekendmech
iichel wrote: ↑Sat May 23, 2020 10:14 am
Sure thing
Could you please try just to enter these two codes to see if they are accepted?
62DD6863422703C5461B16714259C0800904 312mm + 232mm
62DD7863422703C5461B1E714259C0800904 312mm + 256mm
Suggestions for your car:
62DD4463422703C5461B22714259C0800904 288mm + drums (option 1)
62DD4863422703C5461B12714259C0800904 288mm + drums (option 2)
You can try the latter two codes, they both appear in the factory configuration of 288mm fronts and rear drums.
Thanks for the codes. I tried all 4 codes. It threw the same error for all these codes
Coding Rejected : Error 31 : Request out of range
Re: Polo 6R ABS CODING
Posted: Sat May 23, 2020 5:14 pm
by iichel
Understood, I'll have a look later tonight.
Re: Polo 6R ABS CODING
Posted: Sat May 23, 2020 8:47 pm
by iichel
What happens if you change byte 2 to 48 and simultaneously change byte 10 to 12?
Re: Polo 6R ABS CODING
Posted: Sat May 23, 2020 9:51 pm
by theweekendmech
It still gives me the same error. out of range.
Re: Polo 6R ABS CODING
Posted: Sat May 23, 2020 9:53 pm
by iichel
This is very strange. What version of VCDS are you using? Legal or clone?
Re: Polo 6R ABS CODING
Posted: Sun May 24, 2020 1:23 pm
by theweekendmech
Im using the latest version that there on ross tech’s website. It is a legit unit that I am using. I tried putting in the basic setting security code and doing it too. Same results. Anything else that I should be doing but missed? Im new to this coding thing so might miss on some noob steps.
Re: Polo 6R ABS CODING
Posted: Sun May 24, 2020 1:25 pm
by iichel
Very interesting. I don't know how to solve this. Your coding as it is now appears to be correct. But somehow it does not accept any other brake diameter.
Re: Polo 6R ABS CODING
Posted: Sun May 24, 2020 1:27 pm
by theweekendmech
Is there any other work around for such an issue?
Re: Polo 6R ABS CODING
Posted: Sun May 24, 2020 2:39 pm
by iichel
I don't really know.
It can come down to a couple of reasons:
- vcds bug
- some error in your abs module
- it is simply not possible to modify your coding
Re: Polo 6R ABS CODING
Posted: Sun May 24, 2020 3:49 pm
by theweekendmech
So I tried putting in the security access code for the basic setting and it did accept but when I tried putting in the advanced code, it dint accept the code suggested by vcds. Anybody has any idea what code needs to be entered for the advanced security access?