UK-POLOS.NET - THE VW Polo Forum

Hi,
I've got Polo 6c MPI 2014. In my instrument cluster there is no mfa ,there's only outside temperature.
I've bought new shifters with the trip button and install them to my car but the button is no working and there is still no bordcomputer.
Maybe there is no wiring to the bord computer?
Has anyone have got any schema to polo 6c which i can use to make some wiring?

Thank you
T10 is the switchers right?
And t73 is ?

in addition to the wiring, you need to enable MFA/MFD with VCDS.

T73a is one of BCM connector under the driver footwell


Sent from my iPhone using Tapatalk

t73a is one of the bcm plugs, on drivers left

Thanks

And one last question?
Do you know what is oem connection numbers to BCM and to shifters

iichel wrote:

here you go.

pin as per T73a above. 15, 16, 17


Sent from my iPhone using Tapatalk

i mean what pin/connector shall I use to connect the wires to BCM and shifters
https://www.drive2.com/l/6920518/
like on this website

stalks: MCP 1.5
BCM: micro quadlock system

Hi again
Where to enable boardcomputer in vcds?

Anyone??

I'm sorry but I don't know. Did you check VCDS yourself for any labels?