Page 1 of 1

center vents removal - help

Posted: Fri Jul 31, 2020 9:24 am
by kfirg
hello

i have polo gti 2013 (6R)

Could anyone give me some advice on how to remove center vents please?

is there any pictures / manual installation ?

thanks .

just remove the panel + 4 screws and pull out the radio ?

https://www.youtube.com/watch?v=fyqaXV2eXwE

Re: center vents removal - help

Posted: Fri Jul 31, 2020 10:23 am
by RUM4MO
Audi vents have small holes drilled into each frame, and the plan is to use an "L" shaped tool to pull them out - the holes, if VW also provide this method of extraction are located quite far back into the housings.

Re: center vents removal - help

Posted: Fri Jul 31, 2020 10:59 am
by amer6R
You have to remove the radio, and remove the plastic bravket that goes over the whole thing because the vent is behind it.

Re: center vents removal - help

Posted: Fri Jul 31, 2020 11:57 am
by kfirg
in the video he removed the panel (trim) and 4 screwes .
thats all ?

Re: center vents removal - help

Posted: Sat Aug 01, 2020 4:49 pm
by amer6R
No!

Re: center vents removal - help

Posted: Sat Aug 01, 2020 6:02 pm
by ag69
HI,

This would be helpful.

https://youtu.be/zwQ7kO_IlfQ

Re: center vents removal - help

Posted: Sun Aug 02, 2020 6:23 am
by kfirg
It does not look as simple as it seems..

Re: center vents removal - help

Posted: Sun Aug 02, 2020 12:02 pm
by ag69
Yes.
Well i had removed mine center vents to replace dummy buttons. It was quite work.
Removing trim, screw and radio is not difficult.
I don't recollect but cage is quite hard to move.