Ok total Noob here.
I am upgrading factory Stereo in Polo 63 plate.
I am looking at this particular set up : https://incartec.co.uk/product/Volkswag ... 14-IGN-230
Now will this simply replace what I have fitted, once the quad lock iso harness is attached ?
Is this model polo a 'can bus ignition' ?
As I said, I drive them and sing in them, I don't fix them.
Any help welcome, thanks.
Canbus ignition ?
- iichel
- Bling Bling Diamond Member
- Posts: 6477
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: Canbus ignition ?
It looks like they'll be including:
Quadlock to ISO radio adapter harness, with CANbus ignition and antenna adapter (20-156A-IGN)
So I think it will be more or less a plug and play operation
Quadlock to ISO radio adapter harness, with CANbus ignition and antenna adapter (20-156A-IGN)
So I think it will be more or less a plug and play operation
Re: Canbus ignition ?
What is canbus ?
Do I need to do anything else apart from 'plug and play' ?
Do I need to do anything else apart from 'plug and play' ?
- iichel
- Bling Bling Diamond Member
- Posts: 6477
- Joined: Fri Nov 14, 2014 2:14 pm
- Drives: Polo 6R 2.0 TDI, Passat B8 2.0 TSI
- Location: http://mypassat.nl/
Re: Canbus ignition ?
Canbus is the name for your data network in your car.
I think you should be OK with the set you're showing but I'd recommend to ask the seller
I think you should be OK with the set you're showing but I'd recommend to ask the seller
Re: Canbus ignition ?
I will
ty
ty
Re: Canbus ignition ?
Hi again guys.
So I purchased and installed the Pioneer stereo and iso harness.
All worked well for 2 days but all of a sudden, I get intermittent power to the unit.
If I unplug the Canbus interface and reconnect it, it powers up.
Do you think this is a faulty Canbus adapter ?
Or a wiring issue ?
TY.
So I purchased and installed the Pioneer stereo and iso harness.
All worked well for 2 days but all of a sudden, I get intermittent power to the unit.
If I unplug the Canbus interface and reconnect it, it powers up.
Do you think this is a faulty Canbus adapter ?
Or a wiring issue ?
TY.