Page 1 of 1
Can Bus High and Low
Posted: Wed Sep 29, 2021 7:52 pm
by TomGron72
I'm going to add a couple of LED auxilliary lights to my Polo, so I need to tap into the Can Bus system. I got as far as to figure out that the orange cables are Can High and Low, but not which one's what...
The CanM8 is also purchased, so all I need is to figure out this detail before I short circuit the entire system.
Re: Can Bus High and Low
Posted: Thu Sep 30, 2021 6:48 pm
by ho8882000
Maybe this will help you:
- 11111.jpg (226.2 KiB) Viewed 928 times
Re: Can Bus High and Low
Posted: Thu Sep 30, 2021 7:31 pm
by iichel
orange/brown is always low. since brown is always the minus/ground/mass wire, it's easy to remember.
Re: Can Bus High and Low
Posted: Thu Sep 30, 2021 10:06 pm
by TomGron72
ho8882000 wrote: ↑Thu Sep 30, 2021 6:48 pm
Maybe this will help you:
Hey, thanks a lot!! That was awesome of you
Now I just need to wait for the rain to end, because removing the entire front is something I like to do while dry...
Thanks again
Re: Can Bus High and Low
Posted: Thu Sep 30, 2021 10:07 pm
by TomGron72
iichel wrote: ↑Thu Sep 30, 2021 7:31 pm
orange/brown is always low. since brown is always the minus/ground/mass wire, it's easy to remember.
Thanks, that's a great way to remember