UK-POLOS.NET - THE VW Polo Forum

Clarifications about the behavior of the "Rain closing" In your country there are the ideal climatic conditions (rain and heat) for someone to leave or forget a baby or small child inside the car and dies. Unfortunately it happens in many countries of the world. A car closed under the sun...

Tried the following, 1. ignition on -> windows down -> locked the car -> pour water immediately -> and it rolled up the windows 2. ignition on -> windows down -> DIDN't LOCK the car -> pour water immediately -> and it rolled up the windows 3. followed same procedure of #1 and #2 but pour the water ...

Other way, Reverse light Play with the following combinations in BCM Byte11 Bit4 and Bit6. 00, 01, 10, 11 0 = disable 1 = enable Remember, the previous stored faults always must be cleared before or during functional tests for new coding/condition . DRLs The same but in BCM Byte16 Bit2 and Bit6 Tri...

Clear like the water: Subsystem 2 - Part No SW: 6R0 959 802 BH HW: 6R0 959 802 BH Labels: 6R0-959-802.CLB Component: J386__TSG_FT 003 8612 Serial number: KU0KU021021440523980 Coding: 1400B3 Subsystem 3 - Part No SW: 6R0 959 801 BC HW: 6R0 959 801 BC Labels: 6R0-959-801.CLB Component: J387__TSG_BT 0...

Since your new BCM Max 7E0937090 D (last model 7E0) is manufactured for LED headlights (8IT), it is new for all of us. It is not the first time that a BCM PQ25 is parameterized differently to the previous ones. Clarified. Thank you 8) 3A904BFF48A10000013806507CEB96904D80600F608C2141220000030000 I w...

Back-up light or a.k.a. reverse light In the installation guide it never talks about that you have to install a wire from the T73b/7 bcm white connector to the reverse light, ... it is for license plate lights ( blue/black wire ). In your case, the reverse light is adapted by coding. No additional ...

- 3 Very low consumption NO-OEM LED bulbs (DRLs and Back-up lights), my suggestion: buy LED bulbs "CANBUS error free" or install the original bulbs ( first try the new and final BCM coding I provide you below ). I understand this is true for DRL bulbs I had installed non-OEM / non canbus ...

Update the list once you do your checkings. Disabled Byte 0 ->Bit 0 but no luck, here is the latest 1. Auto close windows not working though remote closing operation and one touch up/down works fine. 2. Auto close windows on detecting rain in running or in park mode NOT working. Tested by pouring t...

In the BCM coding YOU enabled the Byte0 Bit0. Any particular reason? This Bit0 is for the selective control of the doors. Disable this byte and check the opening and closing of the windows with the remote control. The car is been used for single occupancy, so I enabled it. But will disable this som...

Ciclo, I have updated the latest coding you sent. And here are the observations, 1. Auto close windows It's still not working, but the comfort feature is all set. 2. CH/LH Verified as you said. CH - semi auto, LH - both works. thanks. 3. It is very likely (99%) that your current WRMs don't have the ...

sure

Hi Ciclo, Hi, once I've read everything you've written (wtf?😂), it's clear that you don't know how some lights or systems work. Why have you modified the BCM Max coding that I proposed? It is not necessary to answer this question. -this coding: ( my proposal ) 3A904BFF48A10000013806406FEB96904980600...

Hello Ciclo, Successfully installed the BCM and other parts as planned. Checked all the lights and electronics and it works fine. However getting below mentioned errors. Also attached the latest auto scan report. Please help me fixing it. Issues facing 1. Auto close windows not working (kept the win...

Yes to both questions. Read the first page of my thread (links) ... But don't code anything posted there until you check that all the lights work correctly with the new BCM coding posted here in your thread. Otherwise, I will ask you infinites Autoscans to be able to answer to your future questions...

Yes to both questions. Read the first page of my thread (links) ... But don't code anything posted there until you check that all the lights work correctly with the new BCM coding posted here in your thread. Otherwise, I will ask you infinites Autoscans to be able to answer to your future questions...