UK-POLOS.NET - THE VW Polo Forum

Nice wheels

Hello, When I have auto-lock on then the car unlocks many times during a trip. It look like when I turn the steering wheel it happens more often. I discoverd this when I placed a MK6 MFSW steering wheel in my 6R. Someone now what problem is? For now I have auto lock off and everything is alright. Bu...

Also with new coded Varta 60AH AGM battery the lights go out when I take my foot from the gas pedal.
Only with byte 16 bit 0 > 0 in BCM module the low beam works without problems.

I saw original xenon headlights has a 2.5mm2 wire for low beam and h7 headlights 1mm2 from T73a/2 and T73b/2 too pin 6 headlight connector. I replace wire with 2.5mm2 but there was no difference. I discovered the battery in the car was the wrong one. I changed in Battery Management EFB battery too w...

I have still one problem with the headlights. While driving both headlights on low beam, both headlights goes out with low beam after a short time.
When take the foot from gas pedal the low beam lights go out.

1.jpg Measure voltage on the socket from rear light. It is the black/blue wire what comes from the BCM T73b/12. Measure voltage at the connector what goes in to the rearlight maybe contacts are corroded. Maybe it's better with automatic transmission for read out with VCDS or something equal. SB27 i...

Hello, I have Sharan 7n 2011 and i need to retrofit from Halogen to Bi-xenon , I have both the OE Bi-xenon and both a wires from KUFATEC I have made some coding and the Low and High beam are working fine , the DRL led is not working at all Any advice , thanks in advance Its the coding. For Polo 6R ...

Headlights working now. I saw in the electrical drawings that there must be a yw/bk wire from SB11 to T73a/44. There was a bn/bk wire in it. I take that out and isolate the terminal and take a new wire for it. I can't find the bn/bk wire in schematic. Someone now what it is originally? The low beam ...

well, yes and no. i probably wrote the guide you're using and I did it myself, so on a technical level, yes. but right now i'm just too busy to really go deep into this, i'm sorry. Okay np. I used indeed your great guide. I take a deep look in the wiring diagrams and hopefully I find it but I think...

iichel wrote: ↑Thu Feb 18, 2021 8:30 am I updated your status to 'registered user' so you can post all you want now.

Okay, thanks. You now also a answer for my problem?

Wednesday,17,February,2021,21:59:07:16365 VCDS -- Windows Based VAG/VAS Emulator Running VCDS autoscan Chassis Type: 6R-VW25 (XXX) Scan: 01 03 04 08 09 10 15 17 19 25 2E 37 44 55 56 61 69 VIN: WVWZZZ6RZDYXXXXXX Mileage: 73450km-45639miles 01-Engine -- Status: OK 0000 03-ABS Brakes -- Status: OK 0000...

Today I finally received all parts for installing the headlights. AFS: left headlight is working, right headlight motor moves but headlight doesn't go up or down (I think internally loose). LED Headlights: First, I tryed without wires from headlight pin 10, 12 and 14. I changed the coding to this: 3...

With ODIS E it can't be done. I ordered VCP for change parameters.

I have checked website, thanks for information. It looks like I need VCP but firtst I gonna try with ODIS E. I think that AFS module is alright because the partnumber is 6R0907357. What I have seen so far is that AFS wiring is the same as with bi xenon only the adapter from 10p halogeen to 14p led c...

Hello, I am retrofitting LED headlights with AFS on my 6R 1.2 TSI Comfort edition 2013. For this I made a BCM swap after reading forum. I went from my original BCM 7H0937090 to 7E0937090C. When purchasing BCM, I did not pay attention to whether they are suitable for LED headlights. I would like to k...