UK-POLOS.NET - THE VW Polo Forum

Right, I'm stuck in Wales, my immobilizer is dead... I can't get towed as I don't have cover, so I'm going to have to do the repair here.

Its some scummy cheap unit who'ever had it before fitted, and the wire breaks and cuts make it clear where it goes, and what its doing.

Any recommendations or ...

Looks well nice!

Thanks bud!

Did the bumpers, they didn't have black to black at halfords, so I used some Black Wax stuff? Came in a little bottle? Its very good! Looks showroom now!

Ta again - LG

had a thought while I was watching the tv, won't the piston slowly move across will I need to jam somthing in there to stop this happening?

i'll pop in to halfords tommorow, I need something to get the bumpers nice and black as well!

Thanks again-LG

Where's the best place to pick that up??

I got some Delphi Lockheed pads, not the cheapest not the most expensive, suppose I really should of checked what is good here first >.<

Just got the new pads for the front brakes, anything worth noting before I fit them this weekend?

Never done it before, so any advice would be sound!

Cheers, Laurence

Fair enough cheers for the heads up!

Okay my first advice would be try again in a few hours, Microsoft are pretty s**t, and I have no trust for any of there servers. Having said that last time I checked they where running Linux >.<

If its not been updated for a while, it probally needs a update installer software patch.

IE6 ...

My Coupe often only gets up to 75 after at least 15 minutes of driving at around 60mph.

I've only ever seen in hotter when the police had a road block and I sat in traffic for 1 hour, we hit 90c.

Surely running at 75 is bad for the engine!?

Hmmmm - Laurence

How high off the ground should the Mk3 Polo be anyway (coupe)? As standard...

Can't work out if mines been lowered...

Laurence

Oh 3 one up, I was looking at the wrong one...

Its worse than the one I was looking at! (sorry!)

Not my cup of tea at all like... LG

Fair enough, I'll go on a mission for a new clock! and photoshop up some dials. Anyone good for parts, or should I go on a scrapy mish/ebay.

The car looks 10 times better just after a good wax, if I get a chance later this week I'll wax and clean it again! :roll:

Is there supposed to be a big ...

Does a little....

I'm thinking of replacing/upgrading the VDU in the Polo....

I've read several of the posts on here and it look very do-able...

At the moment, I literally just have Speed, Oil Temp and a fuel gauge... how difficult would it be to scrap that VDU and replace it with somthing abit more comprehensive ...

Never having looked at my relays this is some blind advice..

But generally rapid are good for components, including LED's (don't get raped on eBay!)

http://www.rapidelectronics.co.uk/rkmai ... CODE=30368