UK-POLOS.NET - THE VW Polo Forum

Ok I replaced the HT leads and temp sensor and it's still got the same problem, any ideas?

Hello all, I have a 6N2 Polo GTI. Basically two weeks ago the car overheated, I took it to my garage and they said it was the thermostat, they replaced it and everything was fine up until last week. The car doesn't overheat but now once the car is warm it will misfire and vibrate when in gear, when ...

Any ideas?

Ok I now get this: VAG-COM Version: Release 409.1-S Control Module Part Number: 6N0 920 904 K Component and/or Version: KOMBIINSTRUMENT BOO V05 Software Coding: 00444 Work Shop Code: WSC 00735 1 Fault Found: 01316 - ABS Control Module 49-00 - No Communications So any ideas on how to fix it, checked ...

This is what the diagnostic said:VAG-COM Version: Release 409.1-US Chassis Type: 6N - VW Polo Scan: 01,02,03,08,15,17,19,25,35,41,45,46,55 ------------------------------------------------------------------------------- Address 01: Engine Controller: 036 906 033 A Component: 1.6l/4V SIMOS3 00HS3259 C...

I'm in stockport, The VAG cable arrived yesterday, i'll see what it says and let you guys know. Thanks

Yup checked the internal fuses.

I watched him do the work, he basically rewired the aftermarket harness and never messed with the actual wiring!!

Alex, I tried what you said and it didn't work! Any other ideas. I'm thinking this could be related to my new Headunit. I fitted a new Headunit and speakers, when I cranked up the volume on the speakers the speakers would crackle and pop and then the HU would cut out. I went to a local fitter and he...

Alex how did you solve your problem, simply by sanding the fuses ontop of the battery? Surely it can't be that simple!

I was thinking of getting this to help diagnose the problem http://cgi.ebay.co.uk/VAG-COM-USB-KKL-409-1-lead-with-software-VW-Code-Tool_W0QQitemZ300398239956QQcmdZViewItemQQptZUK_Diagnostic_Tools_Equipment?hash=item45f12160d4 Anyone know if this is the correct cable? if not can anyone direct me to t...

What he said... Plus... check your brake fluid level... Does the handbrake lever change the handbrake warning light when you raise/lower it.. IE.. is the handbrake switch functioning ok? Where abouts are you located?...(perhaps put a location in your signature!!!) handbrake light does not change. K...

alex

how would I check this, any ideas where the ABS controller is located? Thanks

Hey all

This morning started the car it beeped and the ABS light stayed on with the handbrake light flashing. Brakes still work fine. Any ideas what this could be?

Thanks

Thanks another question lol. I would like to stick in 6.5" front and back, I had the panels of the other day and the speakers at the back are mounted on a plate, I was wondering if I was to install some beefier speakers at the back, the plate would shake and you'd get a lot of rumbling. Is this...

Hey, I have recently acquired a 6n2 GTI and would like to get rid of the standard headunit and speakers. I would like to stick in 6.5" front and back, I had the panels of the other day and the speakers at the back are mounted on a plate, I was wondering if I was to install some beefier speakers...