300bhp 9N3 Polo GTI
-
- New
- Posts: 38
- Joined: Mon Feb 14, 2005 9:31 am
- Location: Chesterfield
- Contact:
http://www.jbsautodesigns.co.uk/lupo.htm
There is also this one.
We put the 1.8T engine in this lovely little sleeper.
This was the first conversion to be completed since I started work here.
I am amazed at the quality of work that comes out of the garage with these conversions.
The Felicia Fun is new on the web site and that is worth a check out too.
Sarah
There is also this one.
We put the 1.8T engine in this lovely little sleeper.
This was the first conversion to be completed since I started work here.
I am amazed at the quality of work that comes out of the garage with these conversions.
The Felicia Fun is new on the web site and that is worth a check out too.
Sarah
-
- New
- Posts: 40
- Joined: Wed Feb 15, 2006 1:57 am
- Location: bethesda
When is this 9n3 GTI coming out, I was told November, then January, Whats the hold up!!! I dont plan to buy a gti model, im going to stick with my 9n3, and drop a S3 lump in instead. With the gti having the 1.8 turbo in it as standard, just take the bits needed from the gti I.E, the mounts, box and drive shafts, then the S3 lump should go in a treat!! However will most likly need a custom intercooler, but thats not the end of the world!!
Soooooo, how much money are we talking for these kind of modifications. Me thinks its gonna be a tad expensive.Josh_PoloGTi wrote:Custom Code Phase 2
Full Exhaust System with downpipe and 100 CEL Cat
CAI
Samco TIP
FMIC and Silicon Hoses
4 Bar FPR
Forge 007 DV
230bhp all day.
Above plus a JBS04 Bolt-On Turbo, 280bhp
Above plus an IHI Turbo and Manifold with uprated injectors, 320bhp
Above plus a JBSGT28RS Turbo and Manifold, uprated injectors, JBS H-Beam Rods, JBS Forged Pistons, JBS One-Piece Valves, 400bhp+.
Welcome to big boys tuning!!
Would be nice to see the look on people faces though, when they get whooped by a Polo!
Mat