My G40 progress thread - 10/01/07 updates, page 9
Few more updates
Charger has been sent to PSD for rebuild and upgrade to full blend. Should get it back next week I presume. In the mean time a lot of tidying up in and around the engine bay have been getting done.
Thanks to Mr Kelly for the spankingly mint front G40 badge. And big thanks to Iain for the free passenger side arch trim! Woop


Also put on red bumper tape.
And yes I know the 'P' is missing from the rear badge, hahah
Got some late spec rear lights for next to nothing at scrapper (also got some German late spec lights coming sometime soon as well)

Wire brushed, rubbed down and then sprayed up fan cowling and motor housing

Been brushing up some bolts and spraying others for various areas

Cleaning and blacking up pipework for charger

Been doing the same kinda thing in engine bay

Rubbed down and sprayed charger dome

Was polishing a bonnet latch up for a while, decided to de-grease it and spray it gloss black. The back side is just lashed in copper grease

Got late spec rear seatbelt guides

However... the arch I got a little while ago flew off on the dualler and subsequently I need another! So gimme a shout if you've got one spare!

Oh, and I've got headlight height adjusters and switches coming along with leccy window switch (but just the switch at the moment, haha) and also some clear front indicators!
She's coming together nicely
Charger has been sent to PSD for rebuild and upgrade to full blend. Should get it back next week I presume. In the mean time a lot of tidying up in and around the engine bay have been getting done.
Thanks to Mr Kelly for the spankingly mint front G40 badge. And big thanks to Iain for the free passenger side arch trim! Woop


Also put on red bumper tape.
And yes I know the 'P' is missing from the rear badge, hahah
Got some late spec rear lights for next to nothing at scrapper (also got some German late spec lights coming sometime soon as well)

Wire brushed, rubbed down and then sprayed up fan cowling and motor housing

Been brushing up some bolts and spraying others for various areas

Cleaning and blacking up pipework for charger

Been doing the same kinda thing in engine bay

Rubbed down and sprayed charger dome

Was polishing a bonnet latch up for a while, decided to de-grease it and spray it gloss black. The back side is just lashed in copper grease

Got late spec rear seatbelt guides

However... the arch I got a little while ago flew off on the dualler and subsequently I need another! So gimme a shout if you've got one spare!

Oh, and I've got headlight height adjusters and switches coming along with leccy window switch (but just the switch at the moment, haha) and also some clear front indicators!
She's coming together nicely
Been busy doing some bodywork recently. Keep in mind it's all just to make the car look a lot better and stop the rust till it's all sorted out next year with a respray
Arch and bottom of the boot have been topcoated. Currently putting filer on the bad bit on the rear quarter and priming some other parts around the car
The light has caught the arch here making it look like a different white - but it is the same

All the wiper arms done in matte black


Some more tidying in the engine bay


But the best bit of all.. I get my 'charger back tomorrow!!! WOOP!!!
Arch and bottom of the boot have been topcoated. Currently putting filer on the bad bit on the rear quarter and priming some other parts around the car
The light has caught the arch here making it look like a different white - but it is the same

All the wiper arms done in matte black


Some more tidying in the engine bay


But the best bit of all.. I get my 'charger back tomorrow!!! WOOP!!!
car is looking much better mate! keep up the good work! your doing some of the little jobs that makes such an improvment that i should really do!
the wiper arms, they got some kind of, is it plastic coating, on them. did you remove it all before you sprayed them? i was going to get new arms but as a quick fix, spraying might be worth while!
the wiper arms, they got some kind of, is it plastic coating, on them. did you remove it all before you sprayed them? i was going to get new arms but as a quick fix, spraying might be worth while!
Well. Turns out I had a boost leak before I sent my charger away! I was only putting out 90bhp. Found the boost leak (pipe from main boost line to BRV wasn't connected) but couldn't take her out for a spin as the charger was with PSD!
So I'm gonna scare myself when I give it some welly after it's run in I'm sure. 30-40bhp jump from last time I drove it here we come!
So I'm gonna scare myself when I give it some welly after it's run in I'm sure. 30-40bhp jump from last time I drove it here we come!
-
Tahrey1043
- Bling Bling Diamond Member
- Posts: 5184
- Joined: Thu Sep 18, 2003 1:15 am
- Location: Birmingham! Enjoys: The pseudo-G-Smiles provided by a 1.6 Megane Sport valver...
- Contact:
it raises a little smile seeing someone taking the time to put all those little touches in (sorting out all the rust patches etc) that i personally never find a moment to fit in
with such skilled care and attention to detail it should run on a long time yet! think it'll be around for the 20th anniversary?
with such skilled care and attention to detail it should run on a long time yet! think it'll be around for the 20th anniversary?
Well. More progress today!
'Charger arrived back from PSD today, woop! Tav came round and gave a helping hand - much appreciated. Had it done in no time
"Running in" in progress! Am checking everything every time I stop too just to be safe. Feels a million times better already though!

Charger fitted!


Me tightening some hose clips

Tav tempted to resort to somewhat harsher methods

Ghetto body repair at it's finest

Back end all fixed and sprayed up for now!

Petrol cap isn't permanent btw! Haha

Bit of beverage

'Charger arrived back from PSD today, woop! Tav came round and gave a helping hand - much appreciated. Had it done in no time
"Running in" in progress! Am checking everything every time I stop too just to be safe. Feels a million times better already though!

Charger fitted!


Me tightening some hose clips

Tav tempted to resort to somewhat harsher methods

Ghetto body repair at it's finest

Back end all fixed and sprayed up for now!

Petrol cap isn't permanent btw! Haha

Bit of beverage

-
Tahrey1043
- Bling Bling Diamond Member
- Posts: 5184
- Joined: Thu Sep 18, 2003 1:15 am
- Location: Birmingham! Enjoys: The pseudo-G-Smiles provided by a 1.6 Megane Sport valver...
- Contact:
