i had fitted my triple gauge panel from 42draftdesigns.com a few weeks ago. I could only wire the lighting and 12v switched power to them because I didn't have enough time. Well, I finally had the free time this weekend to fit the oil pressure sender under the oil filter housing, drill and tap the plastic intercooler pipe, and route the boost hose and pressure wire into the cabin through the empty grommet on the upper right corner of the engine bay. All looks good and everything functions properly, except I snapped the ground wire of the voltmeter while fitting the gauge panel and the boost hose developed a small leak so the boost gauge doesn't read turbo pressure. instead i get a much more interesting "pssssst" sound indicating turbo pressure, which is much more fun
![Smile :)](./images/smilies/icon_smile.gif)
take care all
Yetkin