Camshaft Speed Sensor....

Silva_B!tch_Owner · Post by **Silva_B!tch_Owner** » Mon Sep 10, 2007 12:06 pm

Where is it located? I have no idea where it is and I need to replace the faulty sensor, I have tried using the search function to find info on where it's located but can't find anything.

The part box says impulse sensor is this the same thing?

Also is it easy to replace?

Any help would be much apperciated!

Si_GTi · Post by **Si_GTi** » Mon Sep 10, 2007 6:07 pm

I had mine replaced at time of last service for being faulty, will try and find out from the guy who did the work, where it is located.

Cheers

Bepe · Post by **Bepe** » Mon Sep 10, 2007 6:56 pm

i have a dodgey position sensor LOL, this a similar thing?

mk5coz · Post by **mk5coz** » Mon Sep 10, 2007 10:27 pm

if looking at the engine you have the red rocker cover exposed in front of you with the plastic cover removed you will see 2 sensors on the cam cover the cam sensor is the one to your right the shorter of the 2 held in place with 1 internal hex bolt a 5 minute job to change.

Silva_B!tch_Owner · Post by **Silva_B!tch_Owner** » Tue Sep 11, 2007 2:04 pm

How does it unplugged? Got any pictures?

mk5coz · Post by **mk5coz** » Wed Sep 12, 2007 9:15 pm

the little black plug.(on the top of the plug you will see a little square slot.so to speak. get a little flat blade screwdriver put it in slot with a little pressure pull the tab backwards and push plug at sametime. hope this helps.

Silva_B!tch_Owner · Post by **Silva_B!tch_Owner** » Wed Sep 19, 2007 3:58 pm

Jesus still ain't got round to doing this yet. Arrrrgghhh!