iPod Housing

Overseer · Post by **Overseer** » Wed Oct 22, 2008 3:02 pm

I suppose this would apply to anyone with a USB Stick/MP3 Player/SD Card attachment to a HU...

Right. Iâ€™m looking to connect an iPod to my HeadUnit and really just want to see where other people have theirs positioned theirs in the car?

Pics would be great, especially showing where to position the wire from the HeadUnit.

Iâ€™ve had a look in the glovebox and it looks like Iâ€™m going to have to drill a hole, is there another way?

Cheers.

tomo87 · Post by **tomo87** » Wed Oct 22, 2008 5:38 pm

i had mine drilled and run in the glovebox on my old one and i will deffo be doing that again in the 20v as its the tidiest way

Si_GTi · Post by **Si_GTi** » Wed Oct 22, 2008 5:59 pm

I also drilled a hole in the glovebox and routed the cable to there. I've got an Alpine HU with iPod connectivity.

1der · Post by **1der** » Wed Oct 22, 2008 6:43 pm

same as si did. i also have the alpine hu.

Razz · Post by **Razz** » Wed Oct 22, 2008 8:28 pm

iv drilled a hole in the compartment on the right of the steering wheel and kept it in there

Overseer · Post by **Overseer** » Wed Oct 22, 2008 10:09 pm

Sounds daft, but would someone mind posting pics? Just want to know where I'd have to aim if drilling.

Cheers.

Tim_GTi · Post by **Tim_GTi** » Wed Oct 22, 2008 10:30 pm

I haven't drilled a hole, there's no need. It fits nicely down the crack of the right hand side of the box and front of it. I'd get you a picture but am up at uni.

Overseer · Post by **Overseer** » Wed Oct 22, 2008 10:58 pm

Tim_GTi wrote:I'd get you a picture but am up at uni.

Tim_GTi · Post by **Tim_GTi** » Wed Oct 22, 2008 11:22 pm

Best I can do is next weekend!!!

Post by **alexperkins** » Wed Oct 22, 2008 11:42 pm

Drilling is winning

Si_GTi · Post by **Si_GTi** » Wed Oct 22, 2008 11:59 pm

Overseer · Post by **Overseer** » Thu Oct 23, 2008 7:29 am

Cheers Si.

I guess you have to take the glovebox apart? (I am a complete novice when it comes to things like this).

Post by **alexperkins** » Thu Oct 23, 2008 7:42 am

Nope

Ill take a pic of where mine is. You can get your hand up the back of it, and from the back of the radio and just push the cable through

Overseer · Post by **Overseer** » Thu Oct 23, 2008 8:07 am

Cheers Alex

Tim_GTi · Post by **Tim_GTi** » Thu Oct 23, 2008 2:50 pm

Mine comes out of this crack here:

Works pefectly, plus you don't have to drill anything!!

If you are going to drill though, get a nice rubber grommet to install to make it look nicer