Awesome, the dash conversion is one of my fav mods for the 6n, I think I saw a tutorial on clubpolo once.. have just looked for it again but can't find it!
Polo96CL's Progress Thread - SOLD SOLD SOLD :(
Re: Polo96CL's Progress Thread - Updated :)
WOW that sounds awesome
yer I thing I will look into getting some Philips BlueVision Headlights they do look good on your car I must say 
Awesome, the dash conversion is one of my fav mods for the 6n, I think I saw a tutorial on clubpolo once.. have just looked for it again but can't find it!
good luck with that though, takes a lot of balls lol! I wouldn't have a clue what I was doing, but the look of the 6n2 dash looks so much better IMO!! 
Awesome, the dash conversion is one of my fav mods for the 6n, I think I saw a tutorial on clubpolo once.. have just looked for it again but can't find it!
Re: Polo96CL's Progress Thread - Updated :)
Did you manage to find some headlamp bulbs in the end? I'd try to get some pictures with them on, but my camera is pretty poor without a flash and that kind of defeats the object of the photo!
Yeah i'm speaking to a guy on Club Polo at the moment with the dash, it's going to be a big job but i'm going to be well prepared thats for sure. Its only of those modifcations that you just have to go out and do, otherwise you'll end up never doing it! Eventually i'll get a 6n2 foglight switch and wire up a set of 6n fogs to the front, its just a case of £££ at the moment though.
Yeah i'm speaking to a guy on Club Polo at the moment with the dash, it's going to be a big job but i'm going to be well prepared thats for sure. Its only of those modifcations that you just have to go out and do, otherwise you'll end up never doing it! Eventually i'll get a 6n2 foglight switch and wire up a set of 6n fogs to the front, its just a case of £££ at the moment though.
Re: Polo96CL's Progress Thread - Updated :)
Yer I did thanks, I got some off ebay with sidelights thrown in, I got the H4 bulbs so hopefully they will fit, can't wait until they come!!
As you are doing the dash are you going to get 6n2 door cards as well? I heard they are really tricky to wire up as the switch for the electric windows are in the door cards themselves :S
Can't wait to see your progress on the dash
As you are doing the dash are you going to get 6n2 door cards as well? I heard they are really tricky to wire up as the switch for the electric windows are in the door cards themselves :S
Can't wait to see your progress on the dash
Re: Polo96CL's Progress Thread - Updated :)
Ahh cool, yeah I got some with the sidelights thrown in too. If I remember right they come in the box, so it was just a case of swapping them over, however I changed mine to Prism white LED's in the end.
Defo going to show progress on the dash, be interesting to see how it goes! I'll have to do the doorcards too yeah, as the current ones wont line up well with the dash I don't say, however i'll sell my GTi style ones in it now to make up for some of the costs. Wiring up the doorcard should be pretty easy, it'll just be a case of extending the current loom so that it can go through the door grommet and into the 6n2 style plug. The thing is, once i've got the dash, i've got to get the door cards and the mirrors, as the tweeters are located in the mirrors! So even more than people expect, but it should be good!
Defo going to show progress on the dash, be interesting to see how it goes! I'll have to do the doorcards too yeah, as the current ones wont line up well with the dash I don't say, however i'll sell my GTi style ones in it now to make up for some of the costs. Wiring up the doorcard should be pretty easy, it'll just be a case of extending the current loom so that it can go through the door grommet and into the 6n2 style plug. The thing is, once i've got the dash, i've got to get the door cards and the mirrors, as the tweeters are located in the mirrors! So even more than people expect, but it should be good!
Re: Polo96CL's Progress Thread - Updated :)
Oh cool! I can't wait for mine to come now!! YAYAYAYA! 
Have you already got the dash and everything else needed then? WOW sounds like a lot of work but I am sure when you have finished it will look awesome
! 
I think I am going to look into getting some 6n2 seats for the whole car
because they just fit straight in 
Have you already got the dash and everything else needed then? WOW sounds like a lot of work but I am sure when you have finished it will look awesome
I think I am going to look into getting some 6n2 seats for the whole car
Re: Polo96CL's Progress Thread - Updated :)
Always nice to get some new bits for your motor, i'm really looking forward to getting my Pressed Plates. Not got the dash yet but i've done a lot of research and got it almost fully documented, finally got a loom diagram so i'm going to go through it very soon and then when i've got the loom and dash I can do it pretty easy.
Cool seats, which ones are you looking to get? I got the CC recaro's in mine but it was a right faff changing the backs from a mk3 golf to the polo's. I really like the Mk5 GTi's seats but not sure I could go back from leather now
Cool seats, which ones are you looking to get? I got the CC recaro's in mine but it was a right faff changing the backs from a mk3 golf to the polo's. I really like the Mk5 GTi's seats but not sure I could go back from leather now
-
racerjonzo
- Silver Member
- Posts: 414
- Joined: Sat Sep 08, 2007 8:39 pm
- Location: Glasgow
Re: Polo96CL's Progress Thread - Updated :)
hey any chance you could send me a copy of this loom diagram? ive just got my dash etc, and had a look at it... very messy
a diagram would help muchos, thanks
if you do have a copy could you PM me
cheers
if you do have a copy could you PM me
Re: Polo96CL's Progress Thread - Updated :)
Yer I can't wait to get some alloys now, I really want either some 6n2 gti's like yours or some bbs solitudes! I really want some pressed plates as well but really don't know if the legal pressed plates will look any good! I haven't actually seen a picture of the legal pressed plates so have no idea how they will look to the look a like german show platesPolo96CL wrote:Always nice to get some new bits for your motor, i'm really looking forward to getting my Pressed Plates. Not got the dash yet but i've done a lot of research and got it almost fully documented, finally got a loom diagram so i'm going to go through it very soon and then when i've got the loom and dash I can do it pretty easy.
Cool seats, which ones are you looking to get? I got the CC recaro's in mine but it was a right faff changing the backs from a mk3 golf to the polo's. I really like the Mk5 GTi's seats but not sure I could go back from leather now
I don't know.. I was thinking of getting some 6n2 one's but I really want some leather seats for my interior, preferably black one's like yours! Might just find an upholstery place and ask them to re-upholster the seats lol!
Re: Polo96CL's Progress Thread - Updated :)
The BBS RXii's look really good I reckon, mine have a polished lip and the centres have been repowdercoated so they have a slightly different colour. When i've put a couple of hours into cleaning them up they look amazing, it just takes a while to get the lips back to mirror finish. The pressed plates should be with me this week, if not monday so i'll take some pictures to upload to this thread 
Have you looked at Golf VR6 seats? Ideally i'd look at Mk3 golf Colour concepts in black (mine are the red combo), you can't beat the feeling of sitting down in a set of Recaro's, especially leather ones! You could probably retrim them yourself if you know how to use a sewing machine, however its probably best left to the professionals
I've started writing the comprehensive DIY guide to the Dash conversion, I was speaking to a friend of mine who reckons if I put enough content, details and photo's then I could probably sell it at a small fee. I've been looking at compiling more guides together and possibly selling them as a batch or hardcopys, its just a case of thinking of more stuff to write about (interior retrimming could work well, comprising of doorcards, roof headlining and door pillars) etc.
Have you looked at Golf VR6 seats? Ideally i'd look at Mk3 golf Colour concepts in black (mine are the red combo), you can't beat the feeling of sitting down in a set of Recaro's, especially leather ones! You could probably retrim them yourself if you know how to use a sewing machine, however its probably best left to the professionals
Re: Polo96CL's Progress Thread - Updated :)
Yer I really want some! Just a case of finding some at the right price
Yer I did look at some mk3 golf black leather seats! I am just contemplating whether to buy them or not at the moment, if you don't mind me asking how much did you pay for yours so I can get an idea of what I should be paying, bearing in mind, mine is a 3dr...
Ooo that sounds like a good idea! Your door card retrim tutorial was really good I have to say and I really understood it
Can't wait to see your dash conversion, I know someone on uk-polos did a dash conversion with an audi tt interior! Looked very nice
Ooo that sounds like a good idea! Your door card retrim tutorial was really good I have to say and I really understood it
Can't wait to see your dash conversion, I know someone on uk-polos did a dash conversion with an audi tt interior! Looked very nice
Re: Polo96CL's Progress Thread - Updated :)
I think I paid £220 for my Mk3 Golf Colour Concept Recaro's, came from a red example so had the red seats. They are brilliant seats though and really keep you solid, but with much more support and comfort than the normal seats. They are out of a 3 door car, but with mine being a 5 door it just means I have the handles but I dont use them, they do come in useful though with big loads! I'd say get them, one of the top 3 best purchases on the car without a doubt
I've finally finished the final doorcard and glued down all of the lips on the edges so its all finished now. Also played with tarting up the center console bare switches, but not sure if I like them or not
I've taken some pics, let me know guys what you think 
Before:

After

Pic doesn't make them look very red, but look a couple of pages back and you will see the real colour
I've finally finished the final doorcard and glued down all of the lips on the edges so its all finished now. Also played with tarting up the center console bare switches, but not sure if I like them or not
Before:

After

Pic doesn't make them look very red, but look a couple of pages back and you will see the real colour
- Tim_GTi
- Post Whore
- Posts: 12289
- Joined: Mon Jun 25, 2007 6:31 pm
- Location: Newport, South Wales
- Contact:
Re: Polo96CL's Progress Thread - Updated :)
Looks good dude! I perhaps do a bit more of the dash to tie it in nicely, but don't go over board!
Re: Polo96CL's Progress Thread - Updated :)
Can't wait to get some recaro leathers now 
Yer I like what you have done, but don't over do it like some :S Does look good though
Yer I like what you have done, but don't over do it like some :S Does look good though
Re: Polo96CL's Progress Thread - Updated :)
Well i've got a fair bit of that vinyl left see so i'm looking at places to put some hence those little blanks, suggestions on where else to put it? I'm going to do the 6n2 dash soon so don't really want to spend a load of time retrimming something that'll come out soon, I could probably sell a bit of it off though when its done.
Also ordered some
to put my new pressed plates in which should be coming this week too, that'll clean up the front and rear of the grimy original dealer plates!
Also ordered some
to put my new pressed plates in which should be coming this week too, that'll clean up the front and rear of the grimy original dealer plates!Re: Polo96CL's Progress Thread - Updated :)
Plates have arrived!
I don't really like posting my number plate out there but for display purposes here they are, quality is amazing and look really nice

I don't really like posting my number plate out there but for display purposes here they are, quality is amazing and look really nice


