Tim's GTI. update thread, FOR SALE. NEW WINTERS PG 51

Chat about your MKV (6N2) Polo GTi
User avatar
5509433
Silver Member
Posts: 330
Joined: Mon Aug 10, 2009 10:59 am

Re: Tim's GTI. update thread, INTERIOR SPRAYING DONE PG40

Post by 5509433 »

Sorry mate another quick question before I buy the fabric.

Will the sheet be big enough to cover the whole roof? Because I don't wanna have to make any joins?

Cheers

Whilst the linings off I may as well dynamat it. How long did it take to get the lining off, covered, dried, and put back on? I'm wonderig if its a job for the summer?

Thanks
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Re: Tim's GTI. update thread, INTERIOR SPRAYING DONE PG40

Post by Tim_GTi »

When tape up the seals I meant tape up the rubber areas, as paint reacts funny to rubber, so I masked up everything apart from the cream bits I was planning to spray.

If you buy 3 lengths of that fabric you'll have enough to cover your roof in one, and trim all your pillars.

It took me a day to do all pillars and the roof. The roof is a 2-3 man job getting it perfect. You can strip everything out and drive around without it though if you don't have time.

I didn't have a roof lining for about month (I took everything out way before my I got the materials.
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Re: Tim's GTI. update thread, INTERIOR SPRAYING DONE PG40

Post by Tim_GTi »

Hhhmmm puzzler. Asked my dad to check the milage on my car for me today, as I'm away at uni and want some info on the car.

It's clean and parked in my Nan's garage, but being a small garage it means it's tucked right up against the wall, driver's side.

Apparently my remote won't work, and being one of the cool kidsI don't have a lock on my passenger side! No boot access either.

I return home Sunday for a few days, it could be an interesting one! :lol:
User avatar
alexperkins
Site Admin
Posts: 14873
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
Location: Poole, Dorset, UK.
Contact:

Re: Tim's GTI. update thread, INTERIOR SPRAYING DONE PG40

Post by alexperkins »

keep us posted on that one 8) im sure all will be fine!
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Re: Tim's GTI. update thread, INTERIOR SPRAYING DONE PG40

Post by Tim_GTi »

Aye I'll figure something out hopefully! If/When I get it open I'll have to leave a window open so I don't fall into the same trap!
User avatar
alexperkins
Site Admin
Posts: 14873
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
Location: Poole, Dorset, UK.
Contact:

Re: Tim's GTI. update thread, INTERIOR SPRAYING DONE PG40

Post by alexperkins »

or drive in boot facing the door ;)
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Re: Tim's GTI. update thread, INTERIOR SPRAYING DONE PG40

Post by Tim_GTi »

alexperkins wrote:or drive in boot facing the door ;)
That sketches me out, as I can't see how close I am to the wall!

As you can see, it's dead tight in there!
Image
User avatar
alexperkins
Site Admin
Posts: 14873
Joined: Sat Nov 11, 2006 5:29 pm
Drives: 91 Golf GTI, 01 TT 225, 54 T5 174
Location: Poole, Dorset, UK.
Contact:

Re: Tim's GTI. update thread, INTERIOR SPRAYING DONE PG40

Post by alexperkins »

Hmm you might be able to squeeeeze down the side
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Re: Tim's GTI. update thread, INTERIOR SPRAYING DONE PG40

Post by Tim_GTi »

This picture was taken last year when I detailed it!

At present the driver's side mirror is folded and the car's tucked up a bit further to the wall for more access down the passenger side :lol:
User avatar
spudisdabest
Getting There!
Posts: 63
Joined: Wed Oct 22, 2008 4:42 pm

Re: Tim's GTI. update thread, INTERIOR SPRAYING DONE PG40

Post by spudisdabest »

interior looks lovely bud! few quick questions...

how do you remove the door seals and how do you remove the pillars? especially the ones with the seat belts running through. thanks :D
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Re: Tim's GTI. update thread, INTERIOR SPRAYING DONE PG40

Post by Tim_GTi »

Cheers.

Seals you just pull out carefully.

All pillar trims are the same, they just pop out. You can pop the covers off the seatbelts exposing a large bolt, undo that and your good to go.
User avatar
spudisdabest
Getting There!
Posts: 63
Joined: Wed Oct 22, 2008 4:42 pm

Re: Tim's GTI. update thread, INTERIOR SPRAYING DONE PG40

Post by spudisdabest »

Tim_GTi wrote:Cheers.

Seals you just pull out carefully.

All pillar trims are the same, they just pop out. You can pop the covers off the seatbelts exposing a large bolt, undo that and your good to go.
cheers mucca! iv been scoping out fabric to do my headliner in today and already have some spray adhesive. found a black table sheet thats quite nice material! thanks again!
User avatar
Bradley
Gold Member
Posts: 974
Joined: Thu Jul 16, 2009 5:51 pm
Location: Kent

Re: Tim's GTI. update thread, INTERIOR SPRAYING DONE PG40

Post by Bradley »

Tim i don't suppose you have a part number for your handbrake cover have you?.Also where did you buy your replacement indicators from are they genuine Hella as ive only found replicas on ebay at the moment.

Brad
User avatar
Tim_GTi
Post Whore
Posts: 12289
Joined: Mon Jun 25, 2007 6:31 pm
Location: Newport, South Wales
Contact:

Re: Tim's GTI. update thread, INTERIOR SPRAYING DONE PG40

Post by Tim_GTi »

Hiya mate,

I don't have a part number sorry no. I just bought it from eBay, there was a guy selling a few.

I got mine indicators from eBay also, brand called Deko IIRC? You wouldn't tell them from OEM units, apart from a logo print in the corner of them (it's very subtle). Hope this helps.
emma_88
Gold Member
Posts: 798
Joined: Tue Mar 03, 2009 10:49 am
Drives: 6N2 Polo GTi & 9N3 Polo GTi
Location: Maryport, Cumbria (North West)

Re: Tim's GTI. update thread, INTERIOR SPRAYING DONE PG40

Post by emma_88 »

Tim_GTi wrote:Hiya mate,

I don't have a part number sorry no. I just bought it from eBay, there was a guy selling a few.

I got mine indicators from eBay also, brand called Deko IIRC? You wouldn't tell them from OEM units, apart from a logo print in the corner of them (it's very subtle). Hope this helps.
It's Depo Tim, not Deko, you frube. :P
Post Reply