Porsche Brembos

[scottmk4]

I've got the calipers, with pads, pads retaining springs and the pad retaining pins. Also got the 4 bolts. When i got them I got all the corrosion off the pins and springs and sprayed the springs black quickly for some protection in future and the pins are now like mirrors. The pads have about 90% of the meat left and I also bought some goodridge tt lines and two banjo bolts (need shortening a tad) to attach them to the caliper.

All that is needed is the brackets to fit them on with the 312mm tt conversion people commonly use, these are available off eBay etc etc the lugs to hold the pads in place also need 2-3mm taken off to fit the 25mm discs in as the rear discs on the boxster are only 20mm

I am after 350ono can be contacted via pm or email: [email protected], based in North Yorkshire

[g__humm]

Could u link an adaptor kit

[K.I.T.T.]

Could u link an adaptor kit

Here ya go:
http://cgi.ebay.co.uk/VW-PORSCHE-BREMBO ... 2307682142

Item 2307682142

Ash

[scottmk4]

Cheers KITT for 80 quid extra I can try and get hold of some neuspeed adapters for you, a lad was selling some the other week but have since decided to sell my car so these are no good to me anymore. Let me know if your interested

[g__humm]

Will theese fit under 16 sorry? Running the 312 set up

[scottmk4]

Yeh mate, seen them under 16's before. Depending what wheels you might need small spacers

[scottmk4]

Bump, taking offers, need these gone

[scottmk4]

Prov sold

[scottmk4]

sold