Josh's White 9N.. Problem solved... Power is back !! :D :D
-
greeny2515
- Getting There!
- Posts: 65
- Joined: Tue Jun 08, 2010 7:53 pm
Re: Josh's Thread- Time for L plates :P
heya pal im thinking of smoothing out the bumper trim aswell then lowering 50mil and hopefuly some 17" will still fit.
if i was u ide buy some halo led headlights off ebay, cost me £180 and bout 2 hour to fit, they look sweet cos they tinted black. a black and white them would look ace, shame mine is blue lol
couple more mods tht ive done which r cheap and stand out are: debadged front grill ebay £35, a bonnet bra £45 ebay, gloss black vinyl wrapped roof and spoiler £130, tinted windows ALl ROUND £200 from protint sheffield
tryin to get hold of apex coillovers atm but new batch comes into contry at end of july according to euro car parts but i would rather go for top dolla stuff to be safe, these r £380 which aint bad.
few suggestions there pal good luck
if i was u ide buy some halo led headlights off ebay, cost me £180 and bout 2 hour to fit, they look sweet cos they tinted black. a black and white them would look ace, shame mine is blue lol
couple more mods tht ive done which r cheap and stand out are: debadged front grill ebay £35, a bonnet bra £45 ebay, gloss black vinyl wrapped roof and spoiler £130, tinted windows ALl ROUND £200 from protint sheffield
tryin to get hold of apex coillovers atm but new batch comes into contry at end of july according to euro car parts but i would rather go for top dolla stuff to be safe, these r £380 which aint bad.
few suggestions there pal good luck
- samways-polo
- Getting There!
- Posts: 94
- Joined: Wed Feb 17, 2010 10:27 pm
- Location: Poole, Dorset, UK
Re: Josh's Thread- Time for L plates :P
oright mate cheers for the ideas, i have got some 16" monzas on the way and will probs drop 40mm, i will shortly be getting the tints booked up to do at a garage, got a quote for £135, what grade do you recon? i was thinking either 65% or 80%,greeny2515 wrote:heya pal im thinking of smoothing out the bumper trim aswell then lowering 50mil and hopefuly some 17" will still fit.
if i was u ide buy some halo led headlights off ebay, cost me £180 and bout 2 hour to fit, they look sweet cos they tinted black. a black and white them would look ace, shame mine is blue lol
couple more mods tht ive done which r cheap and stand out are: debadged front grill ebay £35, a bonnet bra £45 ebay, gloss black vinyl wrapped roof and spoiler £130, tinted windows ALl ROUND £200 from protint sheffield
tryin to get hold of apex coillovers atm but new batch comes into contry at end of july according to euro car parts but i would rather go for top dolla stuff to be safe, these r £380 which aint bad.
few suggestions there pal good luck
As with bulbs and lighting etc, just been given a xenon kit for my birthday so will be fitting that soon !
Also i been thinking of colour coding the rear badge looks quite good
your car must look good from the mods youve done
- samways-polo
- Getting There!
- Posts: 94
- Joined: Wed Feb 17, 2010 10:27 pm
- Location: Poole, Dorset, UK
Re: Josh's Thread-
Thanks to a mate, also a polo owner
for getting me the Rclick Hid Xenon kit, much appreciated will be fitted soon as possible !


-
greeny2515
- Getting There!
- Posts: 65
- Joined: Tue Jun 08, 2010 7:53 pm
Re: Josh's Thread-
recently just joined this forum so ill post some pics of mine on in a few days.
ive gone for 80% tinted cos u can still see through and it isnt pitch black inside.
u wonna get down to some vw shows pal u get some good ideas and cheap parts from them, im off to santa pod next weekend for water cooled vdubs like polos lupos golfs etc, hopefully pick up some bucket seats cheapish, interior is next project wiv roll cage rear seats removed and a massive speaker and sub in the floor pan
ive gone for 80% tinted cos u can still see through and it isnt pitch black inside.
u wonna get down to some vw shows pal u get some good ideas and cheap parts from them, im off to santa pod next weekend for water cooled vdubs like polos lupos golfs etc, hopefully pick up some bucket seats cheapish, interior is next project wiv roll cage rear seats removed and a massive speaker and sub in the floor pan
- samways-polo
- Getting There!
- Posts: 94
- Joined: Wed Feb 17, 2010 10:27 pm
- Location: Poole, Dorset, UK
Re: Josh's Thread-
am looking foward to seeing your car once u have finished modifying it ! you have got loads to do ! will look great when youve finishedgreeny2515 wrote:recently just joined this forum so ill post some pics of mine on in a few days.
ive gone for 80% tinted cos u can still see through and it isnt pitch black inside.
u wonna get down to some vw shows pal u get some good ideas and cheap parts from them, im off to santa pod next weekend for water cooled vdubs like polos lupos golfs etc, hopefully pick up some bucket seats cheapish, interior is next project wiv roll cage rear seats removed and a massive speaker and sub in the floor pan
I was thinking 80% tbh , and i would get down to shows but i only turned 17 monday, soon as i pass i will, my mate said there is one on 5th september will try get to that one.
- samways-polo
- Getting There!
- Posts: 94
- Joined: Wed Feb 17, 2010 10:27 pm
- Location: Poole, Dorset, UK
Re: Josh's Thread- new alloys :D
Just had my Monza alloys delivered with top quality conti tyres on, courtey of "M@ turner" thanks alot mate. They looks really good, have painted my calipers red and my drums black to make them look better, pictures of all below








- samways-polo
- Getting There!
- Posts: 94
- Joined: Wed Feb 17, 2010 10:27 pm
- Location: Poole, Dorset, UK
- samways-polo
- Getting There!
- Posts: 94
- Joined: Wed Feb 17, 2010 10:27 pm
- Location: Poole, Dorset, UK
Re: Josh's Thread- new alloys :D
Quick meet with Greg perkins in the road however rubbish picture becasue of iphone, new alloys


-
greeny2515
- Getting There!
- Posts: 65
- Joined: Tue Jun 08, 2010 7:53 pm
Re: Josh's Thread- new alloys :D (pg3)
wot size r they pal cos the clearence looks good, mine gets lowered 60mil this weekend and im wantin 16" hopefully they'll fit. btw they look sweet
- samways-polo
- Getting There!
- Posts: 94
- Joined: Wed Feb 17, 2010 10:27 pm
- Location: Poole, Dorset, UK
Re: Josh's Thread- new alloys :D (pg3)
mate they are 16" and hasnt been lowered atallgreeny2515 wrote:wot size r they pal cos the clearence looks good, mine gets lowered 60mil this weekend and im wantin 16" hopefully they'll fit. btw they look sweet
- samways-polo
- Getting There!
- Posts: 94
- Joined: Wed Feb 17, 2010 10:27 pm
- Location: Poole, Dorset, UK
Re: Josh's Thread- lots of little updates :D
Well havnt put a post for a while and a few bits have been done so thought i should let you lot know...
since my last post i have got my window tints done on my rears at 65% looks really good...
i have also had my xenon conversion kit fitted for headlights and also got hold of some xenon sidleight bulbs so the ligthing is looking good at night...
a slightly different mod... i have put red tape round the grill like the 6n2 and 9n3 gti grill think it looks quite good but its down to personal opinion and i fancied a change.
sorry but il try get some pics up soon so you can see the mods for yourself.... after working all summer have some money to spend so might invest in some bits and pieces
since my last post i have got my window tints done on my rears at 65% looks really good...
i have also had my xenon conversion kit fitted for headlights and also got hold of some xenon sidleight bulbs so the ligthing is looking good at night...
a slightly different mod... i have put red tape round the grill like the 6n2 and 9n3 gti grill think it looks quite good but its down to personal opinion and i fancied a change.
sorry but il try get some pics up soon so you can see the mods for yourself.... after working all summer have some money to spend so might invest in some bits and pieces
- samways-polo
- Getting There!
- Posts: 94
- Joined: Wed Feb 17, 2010 10:27 pm
- Location: Poole, Dorset, UK
Re: Josh's Thread- New Pics
a little photoshoot down at the sea
hope you can see latest mods








Last edited by samways-polo on Wed Jan 12, 2011 10:22 am, edited 1 time in total.
- samways-polo
- Getting There!
- Posts: 94
- Joined: Wed Feb 17, 2010 10:27 pm
- Location: Poole, Dorset, UK
Re: Josh's Thread- New Pics *page 3*- comment??
anybody think this would look sweet with a full votex kit on ?
or not worth the money as im on a low budget ... alternativly would lowering 50mm look just as good ?
or not worth the money as im on a low budget ... alternativly would lowering 50mm look just as good ?
Re: Josh's Thread- New Pics *page 3*- comment??
White looks better just colour coded I think and smoothed looks so clean. I say paint will be gd for you mate
- samways-polo
- Getting There!
- Posts: 94
- Joined: Wed Feb 17, 2010 10:27 pm
- Location: Poole, Dorset, UK
Re: Josh's Thread- New Pics *page 3*- comment??
yeah mate i just seen a whtie 9n that has body coloured standard splitters, looked really goodg__humm wrote:White looks better just colour coded I think and smoothed looks so clean. I say paint will be gd for you mate



