firstly the car is just so fueled with life and instant power response as soon as your foot touches the gas, it goes like an absolute b@stard, it's on revo stage 2 with the following mods
apr r1 diverter valve
milltek turbo back exhaust including milltek sports cat
jr filter
neuspeed power gasket
n75j valve
forge tip
forge front mounted intercooler conversion with all forge hoses
just for your info, the car ran on awesome gti's rolling road today and did a before and after, apr stage 2 software v's revo stage 2
the results are as follows
apr stage 2 = 227 bhp 280ft/lb torque, 212 bhp at the wheels
revo stage 2 = 233 bhp, 291 ft/lb torque, and 221 bhp at the wheels
im made up, the drive is so much more hardcore too, instant uncapped power, and from the graphs, its clear the gains run all the way through the rev band and not just at peak, its clear to see how the gains of 6 bhp and 11 ft/lb and maintained throughout, finally, not at one single point is the apr laeding the way
so far im made up, and although i have only ran the car for 11 miles since having it, im coinvinced it will be a happy relationship we will maintain and keep, well done
massive thanks for awesome gti and their time, doing back to back rolling road testing and providing me with graphs which i have forwarded to revo, jon at awesome was gutted, as he is running a hybrid k04 turbo on his 20vt mk4 ibiza and only has 8 ft/lb torques more and the setup cost his £2'500, quite a good afternoon all in all, pics of the polo gti in question and the graphs below
thoughts?
hope you all like
jeff
haha
