BC's 6N2 GTi (WIP Thread)

Chat about your MKV (6N2) Polo GTi
User avatar
bstardchild
Moderator
Posts: 3057
Joined: Sun Mar 28, 2004 9:53 pm
Location: Norfolk - "Its just Black & Dirty"

Re: BC's 6N2 GTi (WIP Thread)

Post by bstardchild »

Endi_GTI wrote:Looking good mate, Like the wheels a lot.
I wasn't sure if it was gonna be a horrible error but they turned out good - I think
Endi_GTI wrote:However looking a bit high up on them :(
Height adjustment not far away :wink:

Not Slammed just not quite so scared of the road :lol:
User avatar
Endi_GTI
Gold Member
Posts: 940
Joined: Fri Oct 22, 2010 8:00 pm
Location: Plymouth, UK, Drives Polo 6N2 GTI

Re: BC's 6N2 GTi (WIP Thread)

Post by Endi_GTI »

Glad to here it :)

I have just done mine and it looks so much better. Im not into the slammed look either but a slight drop makes a huge difference and the handling is awesome :)
User avatar
bstardchild
Moderator
Posts: 3057
Joined: Sun Mar 28, 2004 9:53 pm
Location: Norfolk - "Its just Black & Dirty"

Re: BC's 6N2 GTi (WIP Thread)

Post by bstardchild »

Was a Pistonheads local run out today

Thread here

http://www.pistonheads.com/gassing/topi ... unday+30th

Couple of Polo pics

BC in car clean shocker :shock:

Image

Image

Image

Image

Image

Image

Rest of the pics are here

http://s108.photobucket.com/albums/n19/ ... an%202011/
User avatar
6N2 GTI 00
Bling Bling Diamond Member
Posts: 4143
Joined: Mon Dec 08, 2008 9:20 am
Location: North Wales, Denbighshire - Drives 255bhp EP3 Type R!

Re: BC's 6N2 GTi (WIP Thread)

Post by 6N2 GTI 00 »

Looking Good Mate :D

Your GTI is crying out for some lowering springs though, either that or coilovers.
User avatar
neilGTI
Gold Member
Posts: 849
Joined: Thu Feb 07, 2008 3:08 pm

Re: BC's 6N2 GTi (WIP Thread)

Post by neilGTI »

deffo needs slamming, would make it look a lot better IMO

Still any GTI is a good looker in my eyes :D
User avatar
bstardchild
Moderator
Posts: 3057
Joined: Sun Mar 28, 2004 9:53 pm
Location: Norfolk - "Its just Black & Dirty"

Re: BC's 6N2 GTi (WIP Thread)

Post by bstardchild »

No coilovers and no slamming - been there done that and not impressed........

but I have a set of lowering springs lined up :lol: So height correction will be carried out before the summer :wink:
User avatar
6N2 GTI 00
Bling Bling Diamond Member
Posts: 4143
Joined: Mon Dec 08, 2008 9:20 am
Location: North Wales, Denbighshire - Drives 255bhp EP3 Type R!

Re: BC's 6N2 GTi (WIP Thread)

Post by 6N2 GTI 00 »

What springs have you got line up? The Eibach Sportlines give it a nice drop and only cost just over £100

The "slammed" look does look awesome though 8) just its not very practical for everyday driving
User avatar
bstardchild
Moderator
Posts: 3057
Joined: Sun Mar 28, 2004 9:53 pm
Location: Norfolk - "Its just Black & Dirty"

Re: BC's 6N2 GTi (WIP Thread)

Post by bstardchild »

6N2 GTI 00 wrote:What springs have you got line up? The Eibach Sportlines give it a nice drop and only cost just over £100
I'll find a picture of them on the donor car
6N2 GTI 00 wrote:The "slammed" look does look awesome though 8) just its not very practical for everyday driving
Roads aren't getting better - it's pothole city round here and where there aren't potholes there are speed bumps etc
User avatar
Bradley
Gold Member
Posts: 974
Joined: Thu Jul 16, 2009 5:51 pm
Location: Kent

Re: BC's 6N2 GTi (WIP Thread)

Post by Bradley »

Forget slamming it dude,a nice 40-50mm drop will have it looking comfortably low and keep practicality up.If you go too low you end up looking like a prat when you can't get into your local Tesco over the speed humps and it also makes less drivable.
User avatar
bstardchild
Moderator
Posts: 3057
Joined: Sun Mar 28, 2004 9:53 pm
Location: Norfolk - "Its just Black & Dirty"

Re: BC's 6N2 GTi (WIP Thread)

Post by bstardchild »

6N2 GTI 00 wrote:What springs have you got line up? The Eibach Sportlines give it a nice drop and only cost just over £100
Bradley wrote:Forget slamming it dude,a nice 40-50mm drop will have it looking comfortably low and keep practicality up.If you go too low you end up looking like a prat when you can't get into your local Tesco over the speed humps and it also makes less drivable.
Springs are off this one

Image

40-50mm suits me just fine

Anyway couple more pics from the Pistonheads run - not ones I took

Image

Image

I'm really pleased with how the wheels turned out :lol:
User avatar
Dom_
Silver Member
Posts: 320
Joined: Sat Jul 17, 2010 3:20 pm
Location: Leeds

Re: BC's 6N2 GTi (WIP Thread)

Post by Dom_ »

Ew Saxo :lol: Wheels look spot on though, will look perfect when lowered
User avatar
6N2 GTI 00
Bling Bling Diamond Member
Posts: 4143
Joined: Mon Dec 08, 2008 9:20 am
Location: North Wales, Denbighshire - Drives 255bhp EP3 Type R!

Re: BC's 6N2 GTi (WIP Thread)

Post by 6N2 GTI 00 »

Those springs should give it a nice drop, that other GTI is running 16" RXII's though which makes the car look lower than it actually is
User avatar
bstardchild
Moderator
Posts: 3057
Joined: Sun Mar 28, 2004 9:53 pm
Location: Norfolk - "Its just Black & Dirty"

Re: BC's 6N2 GTi (WIP Thread)

Post by bstardchild »

6N2 GTI 00 wrote:Those springs should give it a nice drop, that other GTI is running 16" RXII's though which makes the car look lower than it actually is
Same rolling radius on the wheel so I can't see how that's the case - when I went from 13's to 15's on my old 6N Polo 1.4 CL - the arch gap looked bigger on 15's than it did on 13's - same rolling radius on the tyres - so I would have expected the reverse to be true when comparing same car on 16's v 15's RX2's :?:
User avatar
6N2 GTI 00
Bling Bling Diamond Member
Posts: 4143
Joined: Mon Dec 08, 2008 9:20 am
Location: North Wales, Denbighshire - Drives 255bhp EP3 Type R!

Re: BC's 6N2 GTi (WIP Thread)

Post by 6N2 GTI 00 »

The 16" RXII's work out 1.1% larger overall which is nothing but when I'm running 16" rims my car does look lower.
I'm not saying it is lower it just looks lower with the bigger wheels, the larger rims visually fill the arches better.
Si_GTi
Moderator
Posts: 5020
Joined: Thu Apr 08, 2004 1:14 pm
Location: Shropshire

Re: BC's 6N2 GTi (WIP Thread)

Post by Si_GTi »

bstardchild! Long time no see! I was quite surprised (and pleased) to see that you've popped back up on uk-polos :D

Car looks good - just as you've bought your black GTi, I'm about to sell mine :shock:
Post Reply